Specifications:

• Wireless transmitting picture & sound
• Small size, light weight, low power consumption
• High sensibility, easy operation and installation
• Connect the antenna with the receiver
• Plug power jack of DC 9V/12V power supply into the power socket of the receiver (the power indicator is on)
• Connect the output of receiver with monitor with AV wire
• Plug power jack of DC 8V power supply into the power socket of the camera (battery of the same voltage is acceptable)
• Fine tune to the desired position (until the image of wireless camera is received)
• Adjust the lens of the camera to best position

• 1.2GHz CMOS Cameras & Receiver Kit

Camera:

• Camera Apparatus: CMOS camera
• System: PAL/CCIR; NTSC/EIA
• Validity Pixel: PAL: 628 x 582; NTSC: 510 x 492
• Picture Area: PAL: 5.78 x 4.19mm; NTSC: 4.69 x 3.45mm
• Horizontal Definition: 380 line
• Scan Frequency: PAL/CCIR: 50HZ; NTSC/EIA: 60HZ
• Sensitivity: +18DB - AGL ON-OFF
• Focus: Manual Adjustable from 30 mm to ifinity
• Minimum Illumination: 1.5LUX
• Power Output: 200mW
• Power Supply: + 8V DC
• Transmission Signal: Picture, sound
• Operation Frequency: 1.2GHz
• Operation Humidity: 85%RH
• Output: RF
• Power Consumption: <=640MW

• DC 8V power supply

• CMOS camera

Receiver:

• Operation Frequency: 1.2GHz
• Output: 200mA
• Voltage: 9-12V DC
• Power Consumption: 1.2W
• Video and audio RCA jack

• Video and audio RCA jack

• Receiver ports

Package Included:

• 2 x Cameras
• 1 x Receiver
• 2 x 9V Battery Connectors for Camera
• 1 x RCA Cable