Customers Also Bought
- For at least 3 hours continuous working
- Built-in microphone for audio monitoring
- 4 channels available to avoid interference
- Min 100m transmission distance without block
- This security camera receiver set is suitable for monitoring children and elders, and widely used for theft prevention, after-hours
- surveillance, home security
- This unit is manufactured with international new integrated circuit and TFT colorful liquid crystal display technology. It has the following features: low power consumption, stable performance, no X-ray radiation
- It is suitable for monitor, supervision, investigation, obtaining evidence, installation, commissioning and other professional usages, and can meet high-level professional safety demands
- It is attractive for powerful function, simple operation, small volume, wireless signal transmission
- It can be matched with minitype colorful wireless camera for hidden usages. Its signal can penetrate wall and realize synchronization of picture and sound at the site
- Imaging Sensor: 1/3" CMOS
- Validity Pixel: PAL: 628 x 582
- NTSC: 510 x 492
- Picture Area: PAL: 5.78 x 4.19mm
- NTSC: 4.69 x 3.45mm
- Scan Frequency: PAL/CCIR: 50HZ
- NTSC/EIA: 60HZ
- Horizontal Resolution: 380 TV Lines
- Sensitivity: +18DB-AGL ON-OFF
- Focus: Manual Adjustable from 30 mm to Infinity
- Minimum Illumination: 1.5LUX
- Power Output: 200mW
- Frequency Control: Adopt CPU Frequency Lock the Wreath to Control, Stability with High Frequency
- Transmission Signal: Picture, Sound
- Voltage: DC+8V
- Current: 200mA
- Power Consumption: <=640MW
- View Angle: 62
- Gain Control: Automatic
- Frequency: ISM 2,400MHz ~ 2,483MHz 4CH
- Transmission Power: 10mW
- Modulation Mode: FM
- Consumption Current: 80mAh
- Operating Humidity: 85% RH
- Operating Temperature: -10°C ~ +50°C / 14°F ~ 122°F
- Storage Temperature: -40°C ~ -85°C / -40°F ~ +185°F
- Unobstructed Effective Range: 100m
- Output: RF
- Power Supply: AC-DC adapter (DC>6V 800mA)
- Consumption Current: 400mA
- Power Consumption: Approx.3W
- Operation Temperature: -10C~>50C/-14F~>122F
- Storage Temperature: -40C~>85C/-40F~>185F
- Operation Humidity: 85% RH
- Demodulation Type: FM
- Frequency: ISM 900 MHz~1230 MHz
- Intermediate Frequency: 480 MHz
- Antenna: 50 ohm F-Connector
- Receiving Sensitivity: <-75dBm
- The wireless camera receiver set has high quality and durable features which can comfort your requirements all the time
- This wireless camera receiver set is manufactured with international new integrated circuit and TFT colorful liquid crystal display technology
- Setup in seconds with digital wireless technology for clear video and audio
- This wireless camera receiver set is ideal for monitoring entrances, backyards, valuables and employees
How to Set Up a Camera Security System?
Camera security systems have become relatively inexpensive over the past few years, certainly contributing to their steady rise in popularity within homes across America. Not only do these systems give your home an added level of security, also giving you peace of mind, they're also quite easy to install with the right materials and a little ingenuity.
- Select the location you wish to monitor and mount your camera within the general area. High vantage points with the camera pointed downward are typically considered the best angles for capturing large areas.
- Connect the video output jack of the wireless receiver with the video input jack of the monitor using the yellow-headed composite video cable. Both jacks will be painted yellow, indicating video.
- Turn on all the devices, setting the monitor to the proper video channel. Generally this is the channel below "001" (or channel "000") and is typically labeled "AUX" or "VIDEO."
- Synch the wireless receiver to the wireless camera's frequency by scanning through the receiver's frequencies until the image from the camera appears on the monitor. This is similar to scanning through radio stations.
- Place the monitor and receiver in the room you wish to serve as your monitoring center.
- 1 x 1.2GHz Wireless Receiver
- 1 x 1.2G Mini Wireless Audio Color CMOS Camera
- 1.2GHz Wireless Receiver Suitable for monitoring children and elders
- 1 x Audio/Video Cable
- 1 x Switch Power for Receiver
- 1 x Traveling Charger for Camera
- 1 x Antenna
- 1 x 9V Battery Connector for Wireless Camera
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at email@example.com attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 18.06||USD$ 17.25||USD$ 16.43||USD$ 15.35|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.