Specifications:

• Sender and received can be used in pairs at the same channel, one to more in the same channels (one sender transmits signal for multiple receivers with accurate receiving synchronization, equals to a wireless video separator.) or more to more mode (each sender occupy one channel, maximally four channels of video and sound could be transmitted without interference.)
• Video and stereo sound transmitting in NTSC or PAL mode
• The AV input sockets of sender could be connected to TV, DVD, VCD, Video Player etc. equipment, which has AV output
• This unit is manufactured with international new integrated circuit and TFT colorful liquid crystal display technology. It has the following features: low power consumption, stable performance, no X-ray radiation
• It is suitable for monitor, supervision, investigation, obtaining evidence, installation, commissioning and other professional usages, and can meet high-level professional safety demands
• It is attractive for powerful function, simple operation, small volume, wireless signal transmission
• It can be matched with Minitype colorful wireless camera for hidden usages. Its signal can penetrate wall and realize synchronization of picture and sound at the site
• The frequency range of 2.4GHz wireless audio and video receiver is 2.400GHz-2.483GHz.
• It has four-channel switch (2.414GHz, 2.432GHz, 2.450GHz, 2.468GHz) improving flexibility and reliability
• The video signals received are clear, stable and vivid in color, with good sound effect
• Video transmission in NTSC or PAL
• AV output terminal of receiver can be connected with equipment with video and audio input, for example: recorder
• The AV input terminal of receiver can be connected with equipment with video and audio output, for example, VCD, DVD, convenient for installation and commission
• This unit uses Li-ion battery, convenient for tour
• Connection terminal: AV output jack, earphone output jack, power input jack, AV IN jack
• Connect terminals: AV input, Video input, power input

Camera:

• Imaging Sensor: 1/3"CMOS
• CMOS Total Pixels: PAL 628x582; NTSC 510x492
• Horizontal Resolution: 380 TV lines
• View Angle: 62 Degree
• Minimum Illumination: 1.5 Lux/ F1.5
• Gain Control: Automatic
• Frequency: ISM 2,400MHz~2,483MHz 4CH
• Transmission Power: 2mW
• Modulation Mode: FM
• Bandwidth: 18MHz
• Battery Performance: >5V (DC), 700mAh
• Battery Capacity: 250mAh
• Working Time: 3 hours
• Consumption Current: 80mAh
• Operating Humidity: 85% RH
• Operating Temperature: -10C~>50C / 14F~122F
• Storage Temperature: -40C~-85C /-40F~>185F
• Unobstructed Effective Range: 500m
• Channel Frequency: CH1=2414; CH2=2432; CH3=2450; CH4=2468 (MHz)

Reciever: 

• System: PAL/NTSC
• Receiving CH1: 2.414GHz; CH2: 2.43sGHz
• Frequency: CH3: 2.450GHz; CH4: 2.468GHz
• Supply Voltage: 5V
• Current Consumption: 250mA-550mA
• Receiving Sensitivity: -88dBm
• Antenna Input Impedance: 75ohm
• Video Output Level: 1Vp-p
• Audio Output Level: 1Vp-p
• Music Format: MP3, WMA, OGG, AC3
• Video Format: AVI, MPEG1, MPEG2, MPEG4, VOB, DAT
• Picture Format: Pixel (max), support photo browse
• Memory: Flash Memory
• Recording and Playing Mode: Normal play, single song repeat, all song repeat
• Signal-to-noise Ratio: Higher than 85db
• Display Screen: LCD Screen, AUO 2.5 inches
• Whether Convenient for Storing: Yes
• Capacity of Memory: Support the SD Card with Capacities of 128/256MB/512MB/1GB/2GB
• Supporting Languages: English, Chinese (Simple Chinese Language and Traditional Chinese Language), French, Portuguese, Italian, Spanish, Dutch
• Battery Specification: 4.2V/1300mA
• Charging Time: The charging time of adapter is 4 hours
• Playing Time: 2.5 Hours for normal play, and 2 hours for playing monitoring image
• PC Interface Mode: USB 2.0
• Video Outlet: RCA
• Supporting Computer Systems: Vin98SE/ME, Win2000, WinXP
• File Transmission Velocity: Bus writing velocity>6MB/s, reading velocity>7MB/s (for operating system only)
• Software Update: Support
• Power Supply: Built-in Lithium Battery, Power Adapter

Package Included: 

• 1 x Receiver
• 1 x Camera
• 1 x Bag for Receiver
• 1 x 3.7V 1300mA lithium Battery
• 2 x Audio/Video Cable
• 1x 5V 1A Switch Power for Receiver
• 1 x Earphone
• 1 x A/V input Cord
• 1 x Traveling Charger for Camera