Customers Also Bought
- Wireless code transaction can send and receive pictures through wall with high resolution
- Easy installation & operation
- Easy to connect
- Light and small
- Low power consumption and high sensitivity
- Can be widely used
- Visitor identifying
- For home security
- Moving detection
- Entry detection
- Baby and patient tending
- Can be used in entertainment places, bank, department store, office, jewel shop, clothes shop, workshop, warehouse, school, home, supermarket, etc
- The wireless security camera system is suitable for home or other places surveillance
- Full range of accessories, the wireless color CMOS camera receiver system is plug-and-play
- Imaging Sensor: CMOS
- TV System: PAL/CCIR NTSC/EIA
- Validity Pixel: PAL: 628 x 582; NTSC: 510 x 492
- Picture Area: PAL: 5.78 x 4.19mm, NTSC: 4.69 x 3.45mm
- Sensitivity: +18DB - AGL ON-OFF
- Focus: Manual adjustable from 30 mm to infinity
- Minimum Illumination: 3LUX
- Transmission Signal: Picture, Sound
- Power Supply: +8V DC
- Horizontal Resolution: 380 TV Lines
- Operation Frequency: 1.2GHz
- Operation Humidity: 85%RH
- Power Output: 50mW 200mW
- Output: RF
- Power Consumption: <=640MW
- The wireless color CMOS camera features 380 TV Lines Horizontal Resolution, provides HD pictures
- Power Supply: AC-DC
- Adapter: 12V 300mA
- Consumption Current: 80mA
- Power Consumption: Approx.3W
- Operation Temperature: -10°C~+50°C/14F~+122F
- Storage Temperature: -40°C~+85°C/-40F+185F
- Operation Humidity: 85% RH
- The wireless color CMOS camera receiver system is with low power consumption and high sensitivity
- Twist the receiver antenna into the receiver
- Connect the receiver to the monitor with AV cable
- Plug the DC 12V 500mA adaptor into the power jack of the receiver
- Insert the DC 8V 200mA adaptor into the power jack of the camera
- Adjust the frequency controller on the receiver to the required position
- Adjust the lens of the camera to the best position, mount the camera with the screw
- Fix the Transmitter, using the RCA Video, the Audio signal cable connect the transmitter and the single original equipment (eg, Camera, VCD)
- Check the two machine on the suitable position, then inserting the power adapter
- The Transmitter's installation is nearly the same as the receiver's, just the receiver need to be connected with the display equipment
- Confirm that it's right to install the Transmitter and the Receiver in two places, you can open all the power switches and set the Transmitter and the Receiver as the same channel
- Observe the accepting effect, by adjusting the tact of the angle of the Transmitter and the Receiver' antenna until get the excellent Video and Audio effect, the installation is over
- If the original launch signal is one Audio channel, both of the Transmitter's Audio input and Receiver's Audio output should choose the same Audio channel, if the original launch is no Audio, the Audio line don't be connected
- 2 x 1.2GHz Security CCTV Wireless CMOS Color Video & Audio Cameras
- 1 x 1.2 GHz Security CCTV Wireless Radio AV Receiver
- 2 x 9V Battery Connectors for Wireless Camera
- 1 x AV Cable
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at email@example.com attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 35.39||USD$ 33.66||USD$ 31.93||USD$ 29.62|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.