Camera Specifications: 

• Imaging Sensor: 1/3" CMOS
• Validity Pixel: PAL: 628 x 582, NTSC: 510 x 492
• Picture Area: PAL: 5.78 x 4.19mm, NTSC: 4.69 x 3.45mm
• Scan Frequency: PAL/CCIR: 50Hz, NTSC/EIA: 60Hz
• Horizontal Resolution: 380 TV Lines
• Sensitivity: +18DB-AGL ON-OFF
• Power Output: 200mW
• Focus: Manual adjustable from 30 mm to Infinity
• Frequency Control: Adopt CPU frequency lock the wreath to control, stability with high frequency
• Transmission Signal: Picture, sound
• Voltage: DC+8V
• Current: 200mA
• Power Consumption: <=640MW
• View Angle: 62
• Gain Control: Automatic
• Frequency: ISM 2,400MHz ~ 2,483MHz 4CH
• Transmission Power: 10mW
• Modulation Mode: FM
• Consumption Current: 80mAh
• Operating Humidity: 85% RH
• Operating Temperature: -10°C ~ +50°C / 14°F ~ 122°F
• Storage Temperature: -40°C ~ -85°C / -40°F ~ +185°F
• Unobstructed Effective Range: 100m
• Minimum Illumination: 1.5Lux
• Output: RF

Receiver Specifications:

• Power Supply: AC-DC adapter (DC>6V 800mA)
• Adapter: 12V 300mA
• Consumption Current: 400mA
• Power Consumption: Approx.3W
• Operation Temperature: -10C~>50C/-14F~>122F
• Storage Temperature: -40C~>85C/-40F~>185F
• Operation Humidity: 85% RH
• Demodulation Type: FM
• Frequency: ISM 900 MHz~1230 MHz
• Intermediate Frequency: 480 MHz
• Antenna: 50 ohm F-connector
• Receiving Sensitivity: <-75dBm

Camera Features:

• Wireless Camera: 380TV lines Sharp picture display
• For at least 3 hours continuous working
• Built-in microphone for audio monitoring
• 4 channels available to avoid interference
• Min 100m transmission distance without block
• Suitable for monitoring children and elders, and widely used for theft prevention, after-hours surveillance, home security

Receiver Features:

• This unit is manufactured with international new integrate circuit and TFT colorful liquid crystal display technology
• It is suitable for monitor, supervision, investigation, obtaining evidence, installation, commissioning and other professional usages, and can meet high-level professional safety demands
• It is attractive for powerful function, simple operation, small volume, wireless signal transmission
• It can be matched with minitype colorful wireless camera for hidden usage. Its signal can penetrate wall and realize synchronization of picture and sound at the site

Details:

• Newest mini 1/3 inch 1.2GHz, 380 TV lines security CCTV wireless CMOS color camera with wireless receiver suitable for monitoring children and elders, and widely used for theft prevention, after-hours surveillance, home security. For household, companies, shops, factories, security CCTV system kit

• This is a high technology Wireless Surveillance System with DC/AC adapter, adapter, antenna, AV cable and Radio AV Receiver

• Small size and light weight, this Wireless Surveillance is low power consumption. High sensitivity, this wireless CMOS camera and radio AV receiver is easy to install and operate; Let Wireless Surveillance System Bring you convenience and comfort

• Wireless CMOS camera and radio AV receiver kit is suitable for facilities in nerely everywhere Twist the receiver antenna into the receiver; Connect the Wireless Surveillance receiver to the Wireless CMOS Camera with AV cable

How to Set Up a Wireless Surveillance System Inside & Outside the Home:

A wireless surveillance system has the advantage of being able to work both inside and outside the house because no wires are involved. To set up a wireless surveillance system, acquire a wireless video camera kit from a home-and-garden shop or a security service center that comes with a minimum of two cameras, one designed for inside use and the other designed for outside. No computer networking expertise is needed as the wireless network is automatically activated once the cameras have been set up. Tools common to most households are all that is needed

• Open the side panels on both wireless video cameras. Adjust the "Channel" setting on each camera to a different number and letter, for example, set one to "A1" and the other to "A2." Close the side panels
• Screw the video camera mounting plate to the wall in the area that you want to keep under surveillance with wood screws using a Phillips screwdriver. Screw metal screws through the sides of the video camera and into the mounting plate using the Phillips screwdriver. Angle the external antenna on the camera, if there is one, toward the TV that will be used to watch its video. Plug the power cord from the camera into a wall outlet
• Trip the circuit breaker at the fuse box that is supplying electrical power to an outside electric junction box, for example, the porch light or the light above a garage
• Remove the screws from around the lighting fixture that is at the location where you will be placing the external video camera, using a Phillips screwdriver
• Pull the fixture from the wall. Remove the screw-tab connectors over the twisted pairs of black-and-white wires that are now revealed behind the fixture
• Wrap the black wire from the back of the video camera around the black wires from the hole. Wrap the white wire from the back of the video camera around the white wires from the hole. Screw the screw-tab connectors back on the twisted pairs of wires
• Screw the lighting fixture back on the wall with wood screws using the Phillips screwdriver. Screw the video camera wall plate on the wall next to the fixture with wood screws. Screw metal screws through the sides of the video camera and into the plate
• Restore the electric power at the fuse box. Place the wireless video camera receiver next to the TV. Insert one end of a video cable into the video output on the receiver. Insert the video cable's other end into a video input on the TV -- typically this is on the back panel but can also be found on the side or front
• Turn on the TV. Press the "Menu" button on the remote. Navigate to the "Video input" setting. Select the video input corresponding to where the video cable is plugged. Press "Menu" repeatedly until you exit the menu settings
• Plug the wireless video receiver's power cord into a wall outlet. Angle the external antenna, if there is one, in the general direction of the two video cameras if possible. Otherwise, angle it in the direction of the video camera that is farthest from the receiver
• Set the "Channel" setting on the receiver to "Al." Rotate the knob or slide the selector switch to go from one video camera to the next. You should now be able to see the video feed from your surveillance cameras on the TV

Warnings:

• You may need a ladder to reach the lighting fixture
• A weatherproof camera enclosure will protect an outdoor camera from the elements

Package Included:

• 1 x 1.2GHz Mini Wireless Audio Color Spy CMOS Camera
• 1 x 1.2GHz Wireless Receivers
• 1 x 9V Battery Connector for Wireless Camera
• 1 x Audio/Video Cable