Specifications:

• Camera Apparatus: 1/3 inch CCD
• System: PAL / CCIR; NTSC / EIA
• Picture Area: PAL:5.78 x 4.19mm; NTSC:4.69 x 3.45mm
• Horizontal Definition: 380TVL
• Scan Frequency: PAL / CCIR:50HZ; NTSC / EIA:60HZ
• Minimum Illumination: 1LUX / F 1.2
• Sensitivity: +18DB - AGL ON-OFF
• Voltage: DC + 12V
• Current: 500mA
• Power Consumption: <640MW

Details:

What are the recommended camera placements to capture the most relevant shots?

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

• 1 x Mini Wired CCTV Bullet CCD Vidicon Color Camera
• 1 x Stent