Specifications:

• Pick-up Device: 1/3 Inch sharp color CCD
• TV System: PAL / NTSC
• Scanning Area: 4.9 x 3.7mm(H x V)
• Image Area: PAL: 5.18 x 4.19mm
• NTSC: 4.69 x 3.45mm
• Picture Element: PAL: 500(H) x 582(V)
• NTSC: 510(H) x 492(V)
• Horizontal Resolution: 420TV lines
• Scan Frequency: PAL: 50Hz NTSC: 60Hz
• Electronic Shutter: PAL: 1/50 ~ 1/100000 (sec)
• NTSC: 1/60 ~ 1/100000 (sec)
• S/N Ratio: More than 48dB
• Minimum Illumination: 0.1Lux
• Backlighting Compensation: Auto
• White Balance: On / off
• Power Supply: DC12V
• Current Consumption: +500mA
• Sensitivity: +18DB-AGL ON-OFF
• Video Output: 1.0Vp-p, 75Ω, BNC connector
• Synchronous System: Internal synchronization
• Operating Temperature: -20°C ~ +80°C

Details:

• 1/3 Inch SHARP Color CCD 420TVL 0.1Lux 3.7mm CCTV Wired Security Bullet Camera

• Mini bullet appearance, easy for installation

• The base is easy to install and it can hold your camera tightly

What are the recommended camera placements to capture the most relevant shots?

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Caution:

• Any changes of modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
• A regulated DC 12V 300mA power supply is recommended for use with this camera for the best picture and the most stable operation
• An unregulated power supply can cause damage to the camera. When unregulated power supply is applied, product warranty will be out of subject
• It is recommended that the camera is used with a monitor that has a CCTV quality 75 video impedance level. If your monitor is switched to high impedance then please adjust accordingly. If the monitor does not have the impedance adjust switch, please ask us for a camera suitable for your monitor
• Do not attempt to disassemble the camera to gain access to the internal components. Refer servicing to qualified service personal
• Never face the camera towards the sun or spot light or light reflecting objects. Any bright light may cause smear on the picture and possible damage to the CCD
• Except the weather-proof camera, do not expose the camera to rain or moisture. Do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock
• Do not remove the serial sticker for the warranty service

Package Included:

• 1 x 1/3 Inch SHARP CCTV Wired CCD Color Bullet Style Camera
• 1 x Adjustable Camera Bracket