Specifications:

• Image Device: 1/3 Inch SHARP Color CCD
• TV System: PAL/NTSC
• Effective Pixels: PAL: 500(H) X 582(V); NTSC: 510(H) x 492(V)
• Scanning System: NTSC:525 Lines.60 Field/Sec; PAL: 625 Lines 50 Field/Sec
• Horizontal Resolution: 420 TV Lines
• Minimum Illumination: 1.0Lux
• S/N Ratio: More Than 46dB
• Gamma Characteristic: 0.45
• Video Output: 1Vp-p 75 Oms, Negative
• White Balance: Auto
• Electronic Shutter: Pal: 1/50~1/100,000s ; NTSC:1/60~1/100,000s
• Built-In Lens: 4 - 9mm vari-focal Lens
• Operation Temperature: -10℃ ~ + 50℃, RH 95% Max
• Storage Temperature: -20℃ ~ + 60℃, RH 95% Max
• Power Consumption: 12V +/- 10%DC,100mA

Precautions:

• Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage on the camera
• This color CCD camera with advanced high-resolution image sensor produces sharp, clear video with 420 TV lines
• Recommend to use the camera with the monitor which has the standard video input impedance level of 75Oms.If in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
• Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
• Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
• Do not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock

Details:

• This color CCD camera with advanced high-resolution image sensor produces sharp, clear video with 420 TV lines

• 1/3" SHARP chip, 420TV lines, weatherproof and cylinder, CCTV security wired color CCD wired surveillance camera with 4-9mm vari-focal pinhole lens, minimum illumination: 1.0Lux, 12V, +/-10%DC,100mA power supply

• This Waterproof Color CCD Camera is a powerful yet small security camera that doesn't draw attention and blends in well with its surroundings

Introductions:
 

• Do not use the camera if fume, or if it seems not functioning correctly. Disconnect the power cord immediately, and consult your dealer
• Do not adjust or modify the camera's internal circuits or power supply modules, as it may be dangerous and cause damage to the unit. For internal settings and repairing, consult your dealer
• Make sure that no metal objects or flammable substance get inside the camera that may cause damage to the unit. If water or a liquid get inside the camera, disconnect the power cable immediately, and consult your dealer. Be careful to protect the camera from direct exposure to weather, rain, etc
• Do not drop the camera or subject it to strong shock
• It may interfere with or distort the image when install close to an electric or magnetic fields
• Do not install it where there is greasy smoke or steam, where the moisture may get too high, or where there is a lot of dust. Do not install close to stoves, or other heat generating devices. Such as spotlights, etc. Avoid places where there is direct sunlight
• Don't directly touch the CCD element. If necessary, use a soft cloth moistened with alcohol to wipe off the dust

What are the recommended camera placements to capture the most relevant shots?

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

• 1 x Surveillance Camera