Customers Also Bought
- Image Sensor: 1/3 inch SONY Color
- Picture Element: NTSC:512(H) x 492(V); PAL: 512(H) x 582(V)
- System: NTSC/PAL
- Horizontal Resolution: 480TVL
- IR LED: 24PCS
- IR Series Distance: 25M
- Minimum Illumination: 0.00Lux
- Lens: 3.6mm/6mm/8mm/12mm/16mm
- BLC: ON/OFF
- Shutter Speed: 1/50(1/60)～1/100, 000 Second
- White Balance: Auto
- S/N Ratio: >48dB
- Gamma: >0.45
- Operating Temperature: -20℃~50℃
- Synchronizing System: Internal
- Video Output: ≤1.2Vp-p 75Ω(BNC)
- Power Supply: DC12v <150mA
- The layman please do not open canopy
- Carefully lightly puts
- Please do cot have to put in the pickup camera moist or easily the place which is drenched by tile rain, or in the moist place operation, once pickup camera wet, please immediately switches off the power source, asks the specialist to service, moist is very easy to damage the pickup camera, moreover is easy to cause the electro acoustical accident
- The clean photograph machine-hour please do not use the intense cleanser
- Please not have to treat the pickup camera the sun, no matter is in the room or outside, please do not have operates
- Side the spotlight either other glare or the reflection please in the stipulation temperature, the humidity and the power source scope operates the pickup camera, please (-10℃~50℃) is lower then 85 in 14F 122F
How to Build Your Own Night Vision Camera:
- Our eyes are tuned to see the visible spectrum of light, a term used to refer to light with wavelengths between 380 and 750 nanometers. Just because we cannot see any light at night does not mean that there is no light there. Infrared light---light with a wavelength longer than 750 nm---though invisible to the naked eye is visible to cameras. Digital cameras use a special filter to block this infrared light, but with a few modifications to your existing camera, you can build your own night vision camera capable of "seeing" and recording infrared
- Select a digital still or video camera---including webcams---that you would like to modify to a night vision camera. The modification is irreversible and the camera will no longer be able to shoot normal color photos or videos. Film or tape cameras will not work, as neither standard film nor videotape will render infrared light correctly. You will need special film or tape to shoot infrared with a nondigital camera
- Consult your camera's manual to determine the location of the camera's image sensor. It will be labeled either as a CCD or CMOS sensor
- Open your camera, removing screws with your screwdriver if necessary. Even though you can expose a dSLR (digital single lens reflex) sensor by removing the lens, it will be necessary to remove the back of the camera to get to the infrared filter. Video cameras will also need to be opened to access their sensors. Webcams often must be pried apart if their components are attached with clips or glue
- Remove the red-tinted glass that covers the sensor. This is the infrared filter. It will likely be attached to the camera or sensor in some way, so you will need to remove it without damaging the sensor or camera. You can usually slip your screwdriver between the filter and sensor and gently pry the filter off. Be careful to keep the screwdriver from scratching the sensor
- Discard the infrared filter, and reassemble the camera. If you needed to break apart a glued component on a webcam, you can use an adhesive to reconnect the pieces. Digital still cameras and video cameras can be reassembled without replacing any parts
- Take photos or video as usual, remembering that your camera is now capable of seeing more than your naked eye can. Because the modification occurs between the sensor and the lens, you will not be able to see the difference through your camera's eyepiece. Any digital display will show infrared light, however
- Use your infrared flashlight to put more infrared light into your shot and make your subject even more visible. During the day, or when photographing living subjects---as organic material throws off much more infrared light than inorganic material---this flashlight is not necessary, but it will illuminate nonliving subjects at night without casting any visible light
Tips & Warnings:
- After following these steps, your camera will be sensitive to both visible and infrared light
- To render pictures more sharply and without interference from visible light, you can either purchase a visible light filter to connect to your still or video camera's lens, or attach an exposed piece of film to the sensor where the infrared filter was located
- These modifications can damage your camera and will void any warranty. The modification is irreversible
- It will prevent the camera from taking normal pictures unless another infrared filter is used
- Do not attempt these modifications on any camera you are not willing to lose
- 1 x 1/3 Inch SONY Color Camera
- 1 x Charger
- 1 x Camera Bracket
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 45.29||USD$ 42.56||USD$ 39.82||USD$ 36.18||USD$ 36.18|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.
- How is the Frame Rate related to Picture Quality?
Quality can refer to both how detailed the image is and how fast the frame rate is. Frame rate is simply a measure of how many individual pictures make up the video. "Full motion", what you see on television and on VHS tapes, is 30 frames per second, or fps. Most often, security systems record at slower rates, which result in more jerky-looking images but saves tape or hard drive space, allowing longer periods of time to be recorded.
- How does an Infrared Illuminator work?
In situations where events need to be monitored at night, black and white cameras are used with infrared illuminators. Infrared light is used because black and white CCD cameras have very good sensitivity in and near the infrared region. These are wavelengths longer than 7000nm (nanometers). The human eye can see up to 700nm wavelength, and anything above 700nm is invisible to the human eye. Most infrared illuminators come in 730nm, 830nm, and 950nm wavelengths. These infrared illuminators are invisible to the human eye, and that's why they're perfect for night monitoring. You will be able to see in total darkness with these infrared illuminators, without anyone knowing.
- What is a camera's format?
Camera formats are measured in inches: most surveillance cameras fall between 1/4" and 1". This refers to the usable image size created inside the camera. For most security systems, a small size is fine - 1/4" or 1/3" surveillance cameras dominate CCTV sales. Larger formats do not necessarily result in better images, but can be advantageous in dimly lit situations since they are able to gather more light.
- Why is Resolution important to consider?
Resolution refers to how detailed a picture the camera can see. The measurement to look for is horizontal TV lines (TVL). A normal CCTV picture is around 350 to 400 TVL, with high resolution getting up to 480 or 500. You need to make sure your entire system is capable of supporting that resolution. If your VCR records 350 lines and your monitor displays 400, the money you spent to upgrade to a camera with 500 lines is completely wasted.