Camera Specifications:

• Image Sensor: 1/3 inch SONY CCD
• Signal Format: PAL/NTSC
• Effective Pixels: NTSC: 510(H) x 492(V); PAL: 500(H) x 582(V)
• Horizontal Resolution: 420TVL
• Illumination Sensitivity: 0.5 Lux@F:2.0
• Scanning System: NTSC: 525 Lines, 60 Field/Sec; PAL: 625 Lines, 50 Field/Sec
• Sync System: Internal synchronization
• Gamma Characteristic: 0.45
• Gain Control: Auto
• SNR: More than 46dB(AGC Off)
• B.L.C.: Auto
• White Balance: Auto
• Electronic Shutter Speed: NTSC: 1/60-1/100,000 sec; PAL: 1/50-1/100,000 sec
• Power Consumption: DC 12V + 10%
• Video Output: 1.0vp-p,75OMS, Negative
• Current Consumption: 100mA or less
• Operation Temperature: -10℃~+50℃
• Storage Temperature: -20℃~+60℃

Features:

• 1/3 inch SONY CCD
• Horizontal resolution of 420TV lines
• PAL/NTSC signal format
• Auto gain control, white balance and back light compensation
• Mini bullet appearance, easy for installation

Details:

• Perfect substitutions for door scope

• Auto gain control, white balance and back light compensation

• Mini bullet appearance, easy for installation

What are the recommended camera placements to capture the most relevant shots?

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

• 1 x 1/3 inch SONY CCD, Wired Color Security CCTV Camera
• 1 x Bracket