Specifications:

Camera:

• Image Sensor: 1/3" SONY Exview Had CCD
• DSP System: SONY SS1 DSP chipset
• TV System: PAL/NTSC
• Effective Pixels: PAL: 795H x 596V, NTSC: 811H x 508V
• Horizontal Resolution: 500TVL
• Minimum Illumination: 0Lux (IR ON)
• S/N Ratio: 48db (AGC off)
• Video Output: Composite 1.0Vp-p at 750hm
• White Balance: AWB
• AGC: Adjustable
• Backlight Compensation: Adjustable
• Electronic Shutter: 1/50-1/20000sec
• Gamma Correction: 0.45
• Sync. System: Internal
• IR LED: 6 pcs
• Lens: 12mm (Standard)
• IR View Distance: 55m
• Power Supply: DC12V±1V/650mA
• Operation Temperature: -10°C ~ -50°C
• 1/3" SONY Exview Had CCD
• Automatic gain control & BLC
• 6 LED
• Unique design suitable for indoor/outdoor
• Weather resistance IP66
• This CCTV Camera Security System will keep you safe and secure because you'll always know what's going on around you  

Monitor:

• Aspect Ration: 7 inch(16:9)
• Display Element: Color TFT LCD
• Video System: PAL/NTSC
• Active Area: 154.08 x 86.58mm / 6.1 x 3.4in
• Resolution: 480(H) x RGB x 234(V)
• Receiver Channel: 4 Channels
• Brightness: 200cd/㎡
• Contrast Ratio: 300:1
• Db Level: -90dB
• Composite Video (AV): One-way AV input
• OSD Language: English
• Input Voltage: DC 12V
• Max Power Consumption: ≤8W
• 4 Receiver Channel: CH1: 2414MHz, CH1: 2432MHz, CH1: 2450MHz, CH1: 2468MHz
• 7 inch TFT LCD 2.4GHz 4 channels wireless AV color monitor
• Environmentally friendly design
• Remote control with full functions

Converter:

• Transmission Power: 10mW/CE, 2mW/FCC
• Power Supply: DC 12V
• Consumption Current: 20mA (Max.)
• Wired Camera Converter to Wireless Camera: The converter, which designed for CCTV camera with BNC plug. Can convert the signal from CCTV camera to wireless signal and send to the wireless receiver some where
• Ultra-small: With the ultra-small size of 39 x 35 x 33mm / 1.5 x 1.4 x 1.3in(L x W x H) of main body, the camera could beused for discreet observation. Also it could be used for portable monitoring with battery or battery group
• 4 Channels Available: The product works at ISM-2.4GHz. When it is interfered by other wireless equipment at the same band. You could change the operation channel to avoid interference
• 100m Transmission Distance: The product achieves at least 100 meter transmission distance without block. According to the essential principle of electromagnetic wave, actual transmission distance may reduce by through the bemires such as wall, floor, and ceiling , etc
• Transmit video signal by 2.4GHz frequency band
• This Wired Camera Security System is a powerful yet small security camera that doesn't draw attention and blends in well with its surroundings
• With BNC connector plug
• 4-channel available to avoid interference
• Built-in microphone for audio monitoring
• Min. 100m transmission distance without block
• Suitable for CCTV camera and other video devices

Details:

• This CCTV Camera Security System is a powerful yet small security camera that doesn't draw attention and blends in well with its surroundings

• This Home Security Camera System will make your life a little bit easier as it's the perfect way to keep an eye on your home, office, car and more

• With a special lens, conceal them inside of an object for covert operation and protect yourself and your loved ones
• This CCTV Camera Security System will keep you safe and secure because you'll always know what's going on around you  

Size in Detail:

Introductions:
 

Precautions:

• Do not use the camera if fume, or if it seems not functioning correctly. Disconnect the power cord immediately, and consult your dealer
• Do not adjust or modify the camera's internal circuits or power supply modules, as it may be dangerous and cause damage to the unit. For internal settings and repairing, consult your dealer
• Make sure that no metal objects or flammable substance get inside the camera that may cause damage to the unit. If water or a liquid get inside the camera, disconnect the power cable immediately, and consult your dealer. Be careful to protect the camera from direct exposure to weather, rain, etc
• Do not drop the camera or subject it to strong shock
• It may interfere with or distort the image when install close to an electric or magnetic fields
• Do not install it where there is greasy smoke or steam, where the moisture may get too high, or where there is a lot of dust. Do not install close to stoves, or other heat generating devices. Such as spotlights, etc. Avoid places where there is direct sunlight
• Don't directly touch the CCD element. If necessary, use a soft cloth moistened with alcohol to wipe off the dust

How to Protect Your Home With an Outdoor Security Camera?

• Determine the purpose of your outdoor security camera: will you be monitoring to see who comes up to your front door or do you want to be able to watch all angles of the perimeter of your house and yard?
• Determine the view angle you need from your camera. In general, the wider the view the more the camera will record. This is particularly important if you will be using your camera to see who is approaching your front door and you want to be able to determine whether or not they are alone
• Determine the picture quality that you will need from your security camera and choose a camera that will provide it. While many screens are small and can use a lower resolution, a higher resolution will provide a clearer picture
• Choosing a wireless security camera? Choose a camera with a transmission range that will suit your needs; keep in mind that the walls of your home will reduce the range a wireless camera will have
• Planning to record the signal? Choose a camera that will broadcast to the system that you have chosen: closed circuit tv, your computer or a digital video recorder
• Do you want to have a camera that will be on all the time or do you want a camera that will start recording when movement is detected? Either way, a motion detector camera can make sure that you are able to record anything that happens
• Determine the size and type of security camera you are looking for. Do you need a camera that can zoom in, a camera that blends in or a camera that can record sound?
• Lastly, determine whether you want a camera that is monitored by a security company or not; if you do, be sure to choose the right company. Ask questions and get recommendations

How to Install an Outdoor Security Camera System?

• Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source
• Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
• Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor
• Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
• Mount the camera on the brackets. Make sure everything is tightly secured
• Select a location for your monitor. The monitor should be where you spend the most time. If you are using a wireless system, you have completed the setup process
• Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
• Turn on your system to view your area

Applications:

Cautions:

• The layman please do not open canopy
• Carefully lightly puts
• Please do not have to put in the pickup camera moist or easily the place which is drenched by tile rain, or in the moist place operation, once pickup camera wet, please immediately switches off the power source, asks the specialist to service, moist is very easy to damage the pickup camera, moreover is easy to cause the electro acoustical accident
• The clean photograph machine-hour please do not use the intense cleanser
• Please not have to treat the pickup camera the sun, no matter is in the room or outside, please do not have operates
• Side the spotlight either other glare or the reflection please in the stipulation temperature, the humidity and the power source scope operates the pickup camera, please (-10°C~50°C) is lower then 85 in 14F 122F

Precautions:

• Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage on the camera
• Recommend to use the camera with the monitor which has the standard video input impedance level of 750ms. If in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
• Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
• Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
• Do not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock

Package Included:

• 1 x 1/3" SONY 500TVL, 6 LED Infrared Weatherproof Wired CCD Color Camera
• 1 x Wired Camera Converter to Wireless Camera
• 1 x 2.4GHz 4 Channels Security CCTV Wireless AV Receiver Monitor
• 1 x Remote Control