Specifications:

• Image Device: 1/3 inch SONY CCD
• TV System: PAL/NTSC
• Effective Pixels: PAL: (H)752 x (V)582; NTSC: (H)768 x (V)494
• Scanning System: NTSC:525 Lines.60 Field/Sec; PAL: 625 Lines 50 Field/Sec
• Horizontal Resolution: 420 TV Line
• Minimum Illumination: 0.5Lux
• S/N Ratio: More than 46dB
• Gamma Characteristic: 0.45
• Video Output: 1Vp-p 75 Oms, negative
• White Balance: Auto
• Electronic Shutter: Pal: 1/50~1/100,000s ; NTSC:1/60~1/100,000s
• Built-In Lens: 2.97mm board lens
• Operation Temperature: -10℃ ~ + 50℃, RH 95% Max
• Storage Temperature: -20℃ ~ + 60℃, RH 95% Max
• Dimension: Dia. 23mm (Details click the pic. on the left)
• Power Consumption: 12V +/- 10%DC,100mA

Features:

• SONY 1/3 inch CCD
• Horizontal resolution of 420TV Lines
• Auto electronic shutter control
• Auto back light compensation
• Pinhole lens, board lens & vari-focal lens
• Advanced digital signal processing
• DV-12V

Precautions:

• Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage on the camera
• Recommend to use the camera with the monitor which has the standard video input impedance level of 75Oms.If in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
• Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
• Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
• Do not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock

Details:

What are the recommended camera placements to capture the most relevant shots?

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

• 1 x Wired Miniature 1/3 SONY Weatherproof Color CCD Camera 
• 1 x Bracket
• 1 x 12V AC Power Support