1/3" SONY Super HAD B/W CCD 600TVL Camera Main Board A191BH

Specifications:

• Image Sensor: 1/3" SONY Super HAD B/W CCD
• Effective Pixels: CCIR: 752H x 582V   EIA: 768H x 494V
• Scanning System: 625 Lines, 50 frames / sec,  EIA: 525 Lines, 60 frames / sec
• Horizontal Resolution: 600 TV lines
• Signal Format: CCIR/EIA
• Minimum Illumination: 0.5Lux
• S/N Ration: >48dB
• Video Output: 1Vp-p -75 Ohm
• Power Consumption: DC12V ± 10%, 120mA
• White Balance: Auto
• Gamma Correction: 0.45
• Synchronization: Internal synchronization
• Electrnic Shutter: CCIR:1/50~100,000 sec, EIA:1/60~100,000 sec
• Operation Temperature: -10℃-50℃
• Dimension: 17mm / 0.67in(Dia.)
• It's easy to install
• It has been fully tested to ensure complete functionality
• This main board works great well
• With a high-definition picture quality

Details:

• 1/3" SONY Super HAD B/W CCD Camera Main Board

How to Clean a CCD Camera:

• Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
• Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
• Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
• Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

• 1 x 1/3" SONY Super HAD CCD 600TVL Main Board