Customers Also Bought
- Camera Apparatus: 1/4 Inch SHARP CCD
- IR LEDs: 36PCS
- Infrared Night Vision Distance: 15m
- Lens: 6mm
- TV System: NTSC
- Horizontal Definition: 420TV Lines
- Backlight Compensation: ON/OFF Switchable
- Lens Mount: C/CS Mount (C Mount adaptor option)
- Mirror Faction: ON/OFF Switchable
- Electronic Shutter Control: EE/AI Switchable
- White Balance: Auto tracking white balance
- Minimum Illumination: 0.8Lux(F:2.0)
- S/N Ratio: More than 48db(AGCOff)
- Electronic Shutter Speed: 1/50(1/60)~1/100,000sec
- Video Output: 1.0Vp-p, 75Ω, (BNC)
- Picture Elements: 768(H)x494(V)
- Image Size: 4.9mm x 3.7mm
- Scanning Frequency: Horizontal:15.7343KHz
- Vertical: 60Hz
- Auto Iris Lens: VIDEO/DC
- This Infrared Waterproof CCD Camera is easy to install, convenient to adjust
- Night vision function with 36 units LED
- Horizontal resolution up to 420 TV lines
- Auto tracking white balance
- This CCD Camera employs a CCD solid-state image device which provides extremely long life, high reliability
- This Cheap Security Camera is a powerful yet small security camera that doesn't draw attention and blends in well with its surroundings
- This Waterproof IR Camera is suitable for children rooms, garages, home offices and so on
- Users should not disassemble the camera from the front direction
- Always handle the camera with care. Please do not apply a shock or vibration as much as possible and take cautions not to cause damage or make a scratch on the camera due to careless storage
- Do not clean the camera body with the strong abrasives or soaps. When the camera becomes dirty. Clean it with the dry rugs. Especially make sure to use dedicated rugs for lens to clean the dome cover
- This is a Portable 1/4 Inch SHARP CCD 420TVL 36 IR LED CCTV Wired Waterproof Camera
- 36 LED IR CCTV Wired Waterproof CCD Camera
- Easy to use and easy to install
- The detail of its size
Neighbors and visitors will think that you have a complete video surveillance system
The motion detector sensor and activation light makes it appear to be an actual security camera
Customers and coworker will think that you have a complete video surveillance system
Have fun watching how friends and family react when they think they are being video taped
The motion detector sensor and activation light makes it appear to be an actual security camera
Help prevent or deter suspicious activity by placing the security camera to survey the areas
- Do not use the camera if fume, or if it seems not functioning correctly. Disconnect the power cord immediately, and consult your dealer
- Do not adjust or modify the camera's internal circuits or power supply modules, as it may be dangerous and cause damage to the unit. For internal settings and repairing, consult your dealer
- Make sure that no metal objects or flammable substance get inside the camera that may cause damage to the unit. If water or a liquid get inside the camera, disconnect the power cable immediately, and consult your dealer. Be careful to protect the camera from direct exposure to weather, rain, etc
- Do not drop the camera or subject it to strong shock
- It may interfere with or distort the image when install close to an electric or magnetic fields
- Do not install it where there is greasy smoke or steam, where the moisture may get too high, or where there is a lot of dust. Do not install close to stoves, or other heat generating devices. Such as spotlights, etc. Avoid places where there is direct sunlight
- Don't directly touch the CCD element. If necessary, use a soft cloth moistened with alcohol to wipe off the dust
How to Protect Your Home With an Outdoor Security Camera?
- Determine the purpose of your outdoor security camera: will you be monitoring to see who comes up to your front door or do you want to be able to watch all angles of the perimeter of your house and yard?
- Determine the view angle you need from your camera. In general, the wider the view the more the camera will record. This is particularly important if you will be using your camera to see who is approaching your front door and you want to be able to determine whether or not they are alone
- Determine the picture quality that you will need from your security camera and choose a camera that will provide it. While many screens are small and can use a lower resolution, a higher resolution will provide a clearer picture
- Choosing a wireless security camera? Choose a camera with a transmission range that will suit your needs; keep in mind that the walls of your home will reduce the range a wireless camera will have
- Planning to record the signal? Choose a camera that will broadcast to the system that you have chosen: closed circuit tv, your computer or a digital video recorder
- Do you want to have a camera that will be on all the time or do you want a camera that will start recording when movement is detected? Either way, a motion detector camera can make sure that you are able to record anything that happens
- Determine the size and type of security camera you are looking for. Do you need a camera that can zoom in, a camera that blends in or a camera that can record sound?
- Lastly, determine whether you want a camera that is monitored by a security company or not; if you do, be sure to choose the right company. Ask questions and get recommendations
How to Install an Outdoor Security Camera System?
- Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source
- Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
- Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor
- Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
- Mount the camera on the brackets. Make sure everything is tightly secured
- Select a location for your monitor. The monitor should be where you spend the most time. If you are using a wireless system, you have completed the setup process
- Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
- Turn on your system to view your area
How to Build Your Own Night Vision Camera:
- Our eyes are tuned to see the visible spectrum of light, a term used to refer to light with wavelengths between 380 and 750 nanometers. Just because we cannot see any light at night does not mean that there is no light there. Infrared light---light with a wavelength longer than 750 nm---though invisible to the naked eye is visible to cameras. Digital cameras use a special filter to block this infrared light, but with a few modifications to your existing camera, you can build your own night vision camera capable of "seeing" and recording infrared
- Select a digital still or video camera---including webcams---that you would like to modify to a night vision camera. The modification is irreversible and the camera will no longer be able to shoot normal color photos or videos. Film or tape cameras will not work, as neither standard film nor videotape will render infrared light correctly. You will need special film or tape to shoot infrared with a nondigital camera
- Consult your camera's manual to determine the location of the camera's image sensor. It will be labeled either as a CCD or CMOS sensor
- Open your camera, removing screws with your screwdriver if necessary. Even though you can expose a dSLR (digital single lens reflex) sensor by removing the lens, it will be necessary to remove the back of the camera to get to the infrared filter. Video cameras will also need to be opened to access their sensors. Webcams often must be pried apart if their components are attached with clips or glue
- Remove the red-tinted glass that covers the sensor. This is the infrared filter. It will likely be attached to the camera or sensor in some way, so you will need to remove it without damaging the sensor or camera. You can usually slip your screwdriver between the filter and sensor and gently pry the filter off. Be careful to keep the screwdriver from scratching the sensor
- Discard the infrared filter, and reassemble the camera. If you needed to break apart a glued component on a webcam, you can use an adhesive to reconnect the pieces. Digital still cameras and video cameras can be reassembled without replacing any parts
- Take photos or video as usual, remembering that your camera is now capable of seeing more than your naked eye can. Because the modification occurs between the sensor and the lens, you will not be able to see the difference through your camera's eyepiece. Any digital display will show infrared light, however
- Use your infrared flashlight to put more infrared light into your shot and make your subject even more visible. During the day, or when photographing living subjects---as organic material throws off much more infrared light than inorganic material---this flashlight is not necessary, but it will illuminate nonliving subjects at night without casting any visible light
Tips & Warnings:
- After following these steps, your camera will be sensitive to both visible and infrared light
- To render pictures more sharply and without interference from visible light, you can either purchase a visible light filter to connect to your still or video camera's lens, or attach an exposed piece of film to the sensor where the infrared filter was located
- These modifications can damage your camera and will void any warranty. The modification is irreversible
- It will prevent the camera from taking normal pictures unless another infrared filter is used
- Do not attempt these modifications on any camera you are not willing to lose
- 1 x 1/4 Inch SHARP CCD Wired Camera
- 1 x New Grey Middle Pucker Camera Bracket
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at email@example.com attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 27.83||USD$ 26.35||USD$ 24.86||USD$ 22.88|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.