1/4" SHARP CCTV 420TVL 48 LED IR Waterproof Security Wired Color Camera S-1008IA1

Specifications:

• Image Sensor: 1/4" SHARP Color
• System: NTSC / PAL
• Picture Element: 512 x 492 / 512 x 582 (H x V)
• Horizontal Definition: 420TVL
• Lens: 3.6mm/6mm/8mm/12mm/16mm
• IR LED: 48PCS
• IR Series Distance: 50M
• Minimum Illumination: 0.0LUX
• BLC: ON / OFF
• Shutter Speed: 1/50(1/60) ~ 1/100,000 Second
• White Balance: Auto
• S/N Ratio: >48dB
• Gamma: >0.45
• Operating Temperature: -20℃~50℃
• Synchronizing System: Internal
• Video Output: ≤1.2Vp-p 75Ω(BNC)
• Power Supply: DC12v <150mA
• Size: 130 x 80 x 70 mm / 5.12 x 3.15 x 2.76 in

Details:

• The night vision security camera features 1/4 inch Sharp color image sensor and 420TVL horizontal resolution

• With 48PCS IR LEDs, the infrared security camera can well capture picrures even in bad weather and darkness

• Charger of the CCD night vision camera

• High quality cable, connect to TV, VCR, computer or DVR eaily, provide your HD pictures

• Well-designed bracket, fix the night vision security camera stably

• The night vision security camera is easy to install

Size in Detail:

Introduction:

How to Protect Your Home With a Security Camera?

• Determine the purpose of your outdoor security camera: will you be monitoring to see who comes up to your front door or do you want to be able to watch all angles of the perimeter of your house and yard?
• Determine the view angle you need from your camera. In general, the wider the view the more the camera will record. This is particularly important if you will be using your camera to see who is approaching your front door and you want to be able to determine whether or not they are alone
• Determine the picture quality that you will need from your security camera and choose a camera that will provide it. While many screens are small and can use a lower resolution, a higher resolution will provide a clearer picture
• Choosing a wireless security camera? Choose a camera with a transmission range that will suit your needs; keep in mind that the walls of your home will reduce the range a wireless camera will have
• Planning to record the signal? Choose a camera that will broadcast to the system that you have chosen: closed circuit tv, your computer or a digital video recorder

• Do you want to have a camera that will be on all the time or do you want a camera that will start recording when movement is detected? Either way, a motion detector camera can make sure that you are able to record anything that happens
• Determine the size and type of security camera you are looking for. Do you need a camera that can zoom in, a camera that blends in or a camera that can record sound?

• Lastly, determine whether you want a camera that is monitored by a security company or not; if you do, be sure to choose the right company. Ask questions and get recommendations

How to Install an Outdoor Security Camera System?

• Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source

• Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
• Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor

• Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
• Mount the camera on the brackets. Make sure everything is tightly secured
• Select a location for your monitor. The monitor should be where you spend the most time. 

If you are using a wireless system, you have completed the setup process

• Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
• Turn on your system to view your area

Application:

NOTE:

• The  layman please do not open canopy
• Carefully lightly puts
• Please do cot have to put in the pickup camera moist or easily the place which is drenched by tile rain, or in the moist place operation, once pickup camera wet, please immediately switches off the power source, asks the specialist to service, moist is very easy to damage the pickup camera, moreover is easy to cause the electro acoustical accident
• The clean photograph machine-hour please do not use the intense cleanser
• Please not have to treat the pickup camera the sun, no matter is in the room or outside, please do not have operates
• Side the spotlight either other glare or the reflection please in the stipulation temperature, the humidity and the power source scope operates the pickup camera, please (-10℃~50℃) is lower then 85 in 14F 122F

Package Included:

• 1 x 1/4" SHARP Color Night Vision Security Camera
• 1 x Charger
• 1 x Camera Bracket