Specifications:

• Image Sensor: 1/4 Inch Sharp Color CCD
• DSP: Sharp
• CCD Total Pixels: NTSC: 537 (H) x 505 (V); PAL: 537 (H) x 597 (V)
• Scanning System: PAL: 625Lines, 50 Field/Sec; NTSC: 525Lines, 60 Field/Sec
• SYNC System: Internal
• IR LED: 48 PCS
• Minimum Illumination: 1.0Lux F1.2
• Resolution: 420 TV Line
• Whiter Balance: AUTO
• Gain Control: AUTO
• S/N RATIO: 48dB (AGC OFF)
• Electronic Shutter: NTSC: 1/60~1/120,000 sec PAL: 1/50~1/120,000 sec
• B.L.C. Function: AUTO
• Video Output: Composite 1.0V p-p at 75 ohm
• Gamma Correction: 0.45
• LENS: 3.6mm
• Operation Temperature: -10℃ TO 50℃
• Operational Humidity: With in 85%RH
• Power Supply: DC12V±1V / 100mA

Precautions:

• Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage on the camera
• Recommend to use the camera with the monitor which has the standard video input impedance level of 75Oms. If in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
• Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
• Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
• Do not expose the camera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock

Package Included:

•  1 x 1/4 Inch Sharp Chip Camera