Specifications:

• TV System: 1/4 inch SHARP Color CCD
• Image Sensor: NTSC/PAL
• Horizontal Resolution: 420TV Lines
• Scanning System: NTSC: 525 Lines, 60Field/Sec, PAL: 625 Lines, 50 Field/Sec
• S/N Ratio: 48dB(AGC Off)
• Minimum Illumination: 1.0Lux(F:2.0)
• Gain Control: Automatic
• White Balance: Automatic (2500K to 9500K)
• Electronic Shutter Time: Auto, NTSC:1/60~1/100,000Sec, PAL: 1/50~1/100,000 Sec
• Characteristic: 0.45
• Lens Furnished: Board Lens 2.9~3.6mm/F 2.0(optional)
• Sync System: Internal Synchronization
• Video Output: 1 Vp-p 75ohm
• Power Supply: DC 12V/400mA
• Operation Temperature: -10 ℃~ +50℃ RH 95% Max
• Storage Temperature: -20℃ ~ +60℃ RH 95% Max
• Water Resistance: IP66

Features:

• Employs digital signal professor (DSP) chipset for image control
• The wired bullet camera is with built-in image enhancer for ultra-clear images/pictures
• Built-in auto electronic shutter (AES), auto gain control (AGC), auto white balance (AEB) functions
• Reverse polarity protection
• All weatherproof anodized aluminum housing and sun shields
• Rain-and fog-resistant glass coating
• 48-inch DIY cable (Power jack, RCA or BNC connectors) available as an option

Details:

• The wired bullet camera features 1/4 inch SHARP Color CCD image sensor, provides HD pictures 

• The CCD bullet camera all weatherproof anodized aluminum housing and sun shields

• Fix the camera on the bracket, the color bullet camera is sturdy for long time use

• With the cables here, the wired bullet camera is easy to set up, plug and play

Introductions:

How to Protect Your Home With a Security Camera?

• Determine the purpose of your outdoor security camera: will you be monitoring to see who comes up to your front door or do you want to be able to watch all angles of the perimeter of your house and yard?
• Determine the view angle you need from your camera. In general, the wider the view the more the camera will record. This is particularly important if you will be using your camera to see who is approaching your front door and you want to be able to determine whether or not they are alone
• Determine the picture quality that you will need from your security camera and choose a camera that will provide it. While many screens are small and can use a lower resolution, a higher resolution will provide a clearer picture
• Choosing a wireless security camera? Choose a camera with a transmission range that will suit your needs; keep in mind that the walls of your home will reduce the range a wireless camera will have
• Planning to record the signal? Choose a camera that will broadcast to the system that you have chosen: closed circuit tv, your computer or a digital video recorder

• Do you want to have a camera that will be on all the time or do you want a camera that will start recording when movement is detected? Either way, a motion detector camera can make sure that you are able to record anything that happens
• Determine the size and type of security camera you are looking for. Do you need a camera that can zoom in, a camera that blends in or a camera that can record sound?

• Lastly, determine whether you want a camera that is monitored by a security company or not; if you do, be sure to choose the right company. Ask questions and get recommendations

How to Install an Outdoor Security Camera System?

• Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source

• Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
• Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor

• Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
• Mount the camera on the brackets. Make sure everything is tightly secured
• Select a location for your monitor. The monitor should be where you spend the most time. 

If you are using a wireless system, you have completed the setup process

• Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
• Turn on your system to view your area

Application:

What are the recommended camera placements to capture the most relevant shots:

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

• 1 x 1/4 inch Sharp Color CCD Camera