Specifications:

• Camera Apparatus: 1/4 Inch Sharp CCD
• IR LEDs: 14PCS
• Infrared Night Vision Distance: 12m
• Lens: 4/6/8/12/16mm
• TV System: NTSC
• Horizontal Definition: 420TV Lines
• Backlight Compensation: ON/OFF Switchable
• Lens Mount: C/CS Mount (C Mount adaptor option)
• Mirror Faction: ON/OFF Switchable
• Electronic Shutter Control: EE/AI Switchable
• White Balance: Auto tracking white balance
• Minimum Illumination: 0.8Lux(F:2.0)
• S/N Ratio: More than 48db(AGCOff)
• Electronic Shutter Speed: 1/50(1/60)~1/100,000sec
• Video Output: 1.0Vp-p, 75Ω, (BNC)
• Picture Elements: 768(H)x494(V)
• Image Size: 4.9mm x 3.7mm
• Scanning Frequency: Horizontal:15.7343KHz, Vertical: 60Hz
• Auto Iris Lens: VIDEO/DC

Features:

• Users should not disassemble the camera from the front direction
• Always handle the camera with care. Please do not apply a shock or vibration as much as possible and take cautions not to cause damage or make a scratch on the camera due to careless storage
• Do not clean the camera body with the strong abrasives or soaps. When the camera becomes dirty. Clean it with the dry rugs. Especially make sure to use dedicated rugs for lens to clean the dome cover

Details:

• This is 1/4inch SHARP Wired 14 IR LED CCTV CCD 420TVL Camera

• This is the back of camera

• You can see the detals of size

• What a wonderful digital CCD camera

How to Clean a CCD Camera:

• Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
• Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
• Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
• Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Pakage Included:

• 1 x 1/4 Inch SHARP CCD Wired Camera
• 1 x New Grey Middle Pucker Camera Bracket