Dual Head 10x31mm 1W Festoon Bulb Light Lamp (Blue Light) 2 Pcs

Specifications:

• Super bright & long-lasting LED
• Save your power supply
• Unique and attractive color light
• Easy to assemble
• LED light has terminal. So if there is no lighting after inserting it into socket, please change the terminal oppositely
• For 12 / 24volts
• Do not place in rain or water area
• Use this LED light with traffic law
• Size: 30 x 10 x 10mm/1.2 x 0.4 x 0.4in(L x W x H)

Details:

• Super bright & long-lasting LED .Car Light Bulbs can equip your vehicle with huge light output in a small, inconspicuous size

• Designed with durable dual heads .With this high intensity LED Car Light Bulbs, it's much brighter than standard LED, high quality hard materials, a good Car Light for your car

• The longer life and outstanding lighting effect will greatly ease your driving experience .So if there is no lighting after inserting it into socket, please change the terminal oppositely

• The longer life and outstanding lighting effect of this Car Light will greatly ease your driving experience.This Dual Head 10x31mm 1W Festoon Bulb Light Lamp (Blue Light) 2 Pcs is the best choice for you

Size in Detail:

How to Install LED Lights on a Car:



LED lights are a popular aftermarket option for most vehicles as they are brighter-than-normal halogen bulbs and last a lot longer while using less power. The problem with installing LED lights on your vehicle is that you cannot simply swap out the bulbs. You actually need to replace the entire light assembly. The two most common lights that are converted to LED are the headlights and taillights. In order to do so, you must remove the old headlight/taillight assembly and install the new LED assemblies

Headlights:

• Turn the vehicle's engine off and open the hood
• Disconnect the electrical connection harness from the rear of the headlight assembly. Some vehicles require you to remove a rubber seal or cover to access the connector
• Remove the fasteners securing the assembly to the engine compartment. Most vehicles have screws that can be removed with a Phillips screwdriver, but others have bolts that need to be removed with a socket wrench. Pull the assembly out of the engine compartment
• Install the LED headlight assembly and reinstall the fasteners. Reattach the connector harness and the rubber seal/cover if necessary
• Repeat with the other headlight assembly and close the hood

Taillights:

• Turn the vehicle's engine off and open the trunk
• Remove the two screws or bolts securing the taillight cover to the trunk and remove the cover
• Disconnect the taillight's electrical connector harness and remove it from the vehicle
• Install the replacement LED assembly and reconnect the harness. Reinstall the cover and screws
• Repeat with the other taillight assembly and close the hood

How to Replace Car Lights:

• Changing your car lights, specifically its headlights, is a task that most people would prefer to have a specialist do. While it is true that having a mechanic replace your headlights can cost you a lot of money, some people would rather spend a few dollars than to tire themselves out while doing the task themselves. In truth, replacing car lights does not have to be a stressful activity. With the right tools and materials, you can replace your own car headlights. Here is how you can accomplish the task yourself
• Pop your car hood and examine the headlight assembly. Check behind your headlight and see if you need additional tools to access it. While most cars allow easy access to their headlight bulb without any tools, some may require a screwdriver, pliers or wrench to remove its plastic cover
• Turn the car engine off and remove the covers and parts that are blocking the rear side of your headlight assembly
• Hold the headlight module from the headlight assembly's rear, and twist it counter-clockwise to fully release it from the assembly. Pull the headlight module straight out after twisting
• Pull the headlight module bulb in order to disconnect it. Install your new bulb in its place. Some bulbs may require a twist and pull, depending upon the model
• Place your headlight module back into the headlight assembly's rear, twisting it in clockwise direction until it comes to a full lock
• Put back the removed panels on the back of the headlight

Warnings:

• Ensure that your replacement bulb is compatible with the vehicle model. When visiting your local store for auto parts, ask the representative for the bulbs that are compatible with the car

Package Included:

• 2 x Dual Head 1W LED Festoon Bulb Blue Light Lamps