10.2inch (16:9) Scratch-resistant LCD Screen Protector for Notebook / Laptop

Specifications:

• Brand new and in good condition
• Shields against dust, scratches, & water-proof
• Custom design to fit you phone perfectly
• Innovative design for ultra thin, 99% transparent, dusk repelling, and scratch free
• Expect better quality than any other screen protectors
• The LCD screen Guard is designed with no bubbles
• Self-adhering surface and leaves no sticky residue when removed
• This LCD screen Protector is reusable and washable
• Size: 220 x 130mm/8.7 x 5.1in (L x W)

Details:

• Please have a look at 10.2inch (16:9) Scratch-resistant LCD Screen Guard Protector Film for Laptop Notebook which is customized to your laptop notebook LCD screen

• Scratch proof your laptop with the invisible Laptop Screen Guard Protector for 10.2inch screen, this Notebook LCD Screen Protector Film will protect your laptop screen perfectly from dust and fingerprint

• The Notebook LCD Screen Guard is durable, washable, reusable with no residue during removal

• This Notebook LCD Screen Guard is innovative design for ultra thin, 99% transparent, dusk repelling, and scratch free

• Notebook LCD Screen Guard comes with a cleaning cloth that is great for cleaning your notebook

Size in Detail:

How to Protect Your Laptop from Damage:

• Purchase a padded laptop bag. A padded laptop bag does protects your computer from being crushed. It keeps water out and guards against scratching.
• Use a screen protector to protect screen from scratches. These can be purchased online or at office supply stores.
• Protect your laptop from extreme temperatures. Do not expose your laptop to very high or very low temperatures. Do not leave your computer in your car unattended for extended periods of time.
• Keep your laptop away from food and drinks. Beverages are a laptop killer. Be especially careful not to spill on the keyboard

How to Replace a Screen Protector:

• Power off your laptop computer and unplug the power cord. Remove the battery pack from the bay on the bottom of the computer
• Use the tip of your screwdriver (or your fingers, if possible) to remove the rubber pads or covers from each screw on the screen bezel that surrounds the LCD display
• Use your screwdriver to remove all screws from the bezel. Set them aside
• Pry the bezel gently away from the screen at the sides and corners. Some laptops have clips on the sides of the bezel. If this is the case with your laptop, insert a guitar pick or plastic card in the seam at the sides of the bezel and work your way up and down until all the clips are unlocked
• Remove the bezel from the screen and set it aside. Fit a new screen bezel in the old one's place and press on the sides and corners until it locks securely in place. Replace the screws and screw covers

How to Install a Screen Protector:

• Protecting a liquid crystal display on electronic equipment or a laptop is important ensure permanent damage does not occur to a delicate LCD. Installing protective film can be tricky because if the screen is not completely clean, dirt will be trapped beneath the screen protector. Additionally, if care is not taken to adhere the protector, it might not go on smoothly and without wrinkles

Instructions for Attaching a Screen Protector:

• Because many electronics devices have liquid crystal display screens, screen protectors have grown in popularity. To keep an LCD screen clean and avoid scratching the fragile surface, you should cover it with a clear screen protector. The screen protector adheres directly to the LCD screen and covers it entirely. With the screen protector in place, you can then relax and stop worrying about permanent scratches in the LCD screens of your electronic devices

Instructions:

• Clean the LCD screen of your electronic device with a cleaning cloth. You must make the LCD screen perfectly clean before you attach the screen protector; otherwise, any smudges will show through the screen protector
• Cut the screen protector to the correct size. Many screen protectors have a grid imprinted on the paper adhesive backing that makes it easy to cut in straight lines to trim your screen protector. If you err in size, make your screen protector slightly smaller than the LCD screen rather than slightly larger
• Turn the shower on in the bathroom and run it for approximately five minutes with the door closed. A moist environment is optimal for attaching a screen protector because less dust will accumulate on the LCD screen in this environment
• Turn the shower off and take your electronic device into the bathroom. Close the door
• Peel away one corner of the paper adhesive and begin attaching the screen protector to the LCD screen. Smooth the edge of the screen protector with a credit card to remove bubbles as you apply the screen protector. Continue peeling away the paper adhesive and pressing the credit card as you attach the screen protector until the screen protector is on completely.
• Run the edge of the credit card across the screen protector again to remove any remaining air bubbles

Tips & Warnings:

• Perform the adhesive process in a steamy bathroom to ensure there is no dust on the LCD

Package Included:

• 1 x LCD Screen Protector
• 1 x Cleaning Cloth