1000W DC 24V to AC 220V USB 5V Car Power Multifunctional Inverter DY-8102

Specifications:

• Power: 1000W
• Input Voltage: DC24V
• Output Voltage: AC220±10
• Peak Power: 1600W
• Continuous Power: 800W
• Output Waveform: Modified sine wave
• Frequency: 50Hz
• Efficiency: >90%
• Static Current: >300MA
• Lower Input Voltage Warning: 10.5VDC±0.5V
• Lower Voltage Protection: 10VDC±0.5V
• Over Reloading Protection: 1000W
• High Temperature Protection: Yes
• Short Circuit Protection: Yes
• Dimension: 260 x 175 x 76mm / 10.2 x 6.9 x 3.0in(L x W x H)

Features:

• Automatic protection against overload, over temperature and low/high battery conditions
• Three prong grounded or European AC
• Built in cooling
• Power ON/OFF switch

Details:

• The output of the USB car power inverter is a universal socket, which can be used in many countries

• The USB car power inverter features automatic protection against overload, over temperature and low/high battery conditions

• High quality material makes the multifunctional car power inverter durable and reliable for long time use

Size in Detail:

How to Install a Car Power Inverter:

• Park the vehicle and open the hood. Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
• Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
• Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
• Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery

Package Included:

• 1 x Car Power Inverter Charger
• 1 x Power Cable