DVI 12+5 Pin Male to VGA Female Adapter Converter

Specifications:

• DVI-A (M) to VGA (F) video adapter allows you to connect a DVI-A device to a VGA device using an VGA cable
• One end of the cable adapter is an DVI-A male connector and the other end is VGA female connector
• Simply plug the DVI-A male converter adapter to a DVI-A supported device, and then connect a VGA cable which is plugged into the VGA device to the VGA connection on the adapter
• This is DVI-A to 15-pin VGA plug adapter
• DVI-A 12+5 pin male cable adapter
• This is 15-pin VGA female cable adapter
• Dimension: 4.2 x 4.0 x 1.5cm/1.6 x 1.5 x 0.6in(L x W x T)

Details:

• The converter adapter is durable and exquisite
• It can satisfy your long time use

• It ensures interference free operation and maximum transfer rate interference guarded

• The port is standard for sweeping use
• High quality ensures operational stability

• The converter adapter with mini shape which is convenient to use and pack up

• Long time enough for you to use
• You deserve to have it

How to Diagnose Display Adapter Problems:

Blank Monitor

• Turn off your computer and remove the power cable. Remove the case cover. Locate the display adapter. This is normally the largest add-in card in the computer and the one to which the monitor connects. Determine that the display adapter is properly seated in the slot
• Disconnect and reconnect the monitor cable. Ensure that the cable is properly attached to the display adapter and the monitor
• Turn the computer on again. If the monitor remains blank, you may either have a faulty display adapter or monitor, a hardware compatibility issue or a faulty cable. Test the monitor with another computer if one is available

Computer Running Very Loudly

• Turn off the computer and open the case. Locate the display adapter
• Clean the fan using a can of compressed air or by blowing dust off the fan blades
• Replace the video adapter cooler if cleaning the fan does not help

Corrupted Display

• Right click anywhere on the desktop if you are using Windows Vista or Windows 7. Select "Screen resolution." Set the screen resolution to the recommended setting. This should be the native resolution of your monitor
• Reinstall the drivers if the problem is not solved. Obtain the latest drivers for your display adapter from the manufacturer's website
• Install the drivers. Follow the on-screen instructions. Restart the computer after the installation

How to Install a Powerline Adapter:



A powerline adapter extends the broadband signal of a wireless Internet router. It plugs into a wall socket and uses an antenna to extend the broadcast. Powerline adapters are useful in large houses where your router's signal may not reach every room, and you can install one in about 10 minutes. Powerline adapters will connect to your PC via a USB adapter, or an ethernet cable. This operation is designed for Belkin Powerline adapters

• Connect your computer and the powerline adapter with an ethernet cable. If you are using a USB adapter, just substitute USB cable for ethernet cable
• Insert the installation disc into your computer's CD or DVD drive
• Click "Next" at the welcome screen
• Click "OK" at the instructional screen
• Click "Yes" to reboot your computer
• Disconnect your powerline adapter from your computer
• Plug your powerline adapter into an available wall socket. You should see two green lights appear after a few moments. The green lights will mean the adapter has both power and an Internet signal

Package Included:

• 1 x DVI 12+5 Pin Male to VGA Female Adapter Converter