60mm 15 LED Car Angel Eye White Ring Light Headlight 2Pcs

Specifications:

• This 36 LED light strip is easy to bend and shaper for unique design
• Low power, energy efficient, virtually no maintenance needed
• Waterproof designed strip light can be used both external and internal
• LED Light Strip increase driving safety and warning effect at night
• 15 SMD super bright high power 1210 LED light ring
• Specially designed Car Headlight makes your vehicle cool and safer
• This LED Light Strip allows day and night driving to be safer, acting as a warning to passing-by vehicles
• Produce strongest and brightest rays
• Working Voltage: 12-14V DC
• A Single LED: SMD 1210, 0.2W, 15LM
• Color Temperature: 6000K
• Light Color: White
• Size: Approx.15cm/6in(L)(Wire); 60mm/2.4in(Dia.)

Details:

• 36 LED 60mm Car Angel Eye White Car Light Headlight is brand new and fashionable

• Waterproof designed LED Headlight can be used both external and internal

• Low power, energy efficient, virtually no maintenance needed

Replacing Headlights:



Step 1 - Purchase a Replacement Bulb:

• Purchasing a replacement bulb first will help you frame the project in your mind. In most new cars, the bulbs are sealed in the headlamp and therefore the entire headlamp will need to be replaced. In other cars, the bulb can be removed from the headlamp, replaced and re-installed in the headlamp
• Before you work on any electrical components within your car, turn the engine off, remove the key and disconnect the positive terminal from the battery

Step 2A - Replacing the Old Headlamp:

• Locate the bolts or screws that hold the headlamp in place. You will need a socket set, screwdriver or both to complete the process. It is also likely you will need to remove decorative body molding and the actual metal bracket that holds the lamp in place. The bolts may be in the front of the vehicle, under the bonnet or both. Once removed, the headlamp should pull forward to reveal the electronic connection. Unclip the connection and remove the headlamp
• Connect the electrical housing to the new headlamp, place it back in its housing and re-install the bracket and body molding. It's a good idea to turn the headlights on before you tighten the bolts to confirm the connection has been made and the new light is working properly

Step 2B - Replacing the Bulb:

• Open and secure the bonnet of your car. Behind the headlights, within the engine compartment, locate the electrical connection and determine how it is removed. It is likely that this connection twists off (by hand) and, when removed, reveals the actual bulb. This, too, should twist from its socket. Install the new bulb, replace the electrical connection and test the new light

Replacing Brake Lights:

• Open and secure the boot of your car. Behind the brake lights, within the trunk, locate the electrical connection and determine how it is removed. You may have to pull back the trunk's carpeting or covering to reveal this connection. It is likely that the connection twists off (by hand) and, when removed, reveals the actual bulb. This, too, should twist from its socket. Install the new bulb, replace the electrical connection and test the new light

Replacing Indicators:

Rear Indicators:

• Open and secure your car's trunk. Behind the indicator lights, within the trunk, locate the electrical connection and determine how it is removed. You may have to pull back the trunk's carpeting or covering to reveal this connection. It is likely that the connection twists off (by hand) and, when removed, reveals the actual bulb. This, too, should twist from its socket. Install the new bulb, replace the electrical connection and test the new light

Side Indicators:

• Side indicators will either unscrew from the exterior of the car to reveal the indicator bulb, or it is accessible from the engine compartment. Once determined, repeat the process of replacing the rear indicator and test the lights

Package Included:

• 2 x Car Angel Eye White Ring Light Headlights
• 2 x Adapters