Specifications:

• Compressed Picture: M-JPEG
• Video Signal: NTSC/PAL
• Display Resolution: 720 x 576 (PAL), 720 x 480 (NTSC)
• Record Resolution: 720 × 288 or 360 × 288 (PAL), 720 × 240 or 360 × 240 (NTSC)
• Video Input: BNC x 16CH
• Video Output: BNC x 2CH, S-Video
• Audio Input: -8Db 22K Ώ, RCA Connector x 4
• Audio Output: -8Db 3K Ώ, RCA Connector x 2
• Alarm Input: NO or NC, 16CH
• Alarm Output: 1CH
• Recording Mode: Manual / Timer / Motion Detection / Sensor
• Simplex/Duplex/Triplex: Triplex
• Network Interface: Triplex
• Network Interface: RJ45 (LAN, Internet)
• PTZ Control: Yes, RS485
• HDD Disk Drive: Support 2pcs Hard Disk
• Package Included:Yes
• USB: USB2.0 Drive
• Storage Temperature & Humidity: -20--65℃ / 20-95% RH (No Condenser)
• Operation Temperature & Humidity: -5--50℃ / 20-80% RH (No Condenser)

Feature and Function:

• Supports Network View
• Support USB2.0 Drive Disk Backup and CD-RW Backup
• Support 2pcs HDD Hard Disk
• Inbuilt CD-RW Driver
• Compatible with NTSC and PAL Format
• Supports Zooms, Auto Function, Watermark Security
• Four Optional Levels of Image Quality: very high, high, normal, low. Record and playback frame rate changeable for recording
• Supports Alarm Recording, Time Recording and Manual Recording
• Supports Loss and Motion Detection Functions.
• Multi-Function Searches: be able to distinguish different alarm records and time records from ordinary records; be able to search by time, by segment or by event
• Supports Various Playback Modes: pause, several fast forward and backward play modes.
• Equipped with Remote Device and PTZ Control Enables(RS485)
• Triplex Operation can play back and search while it is recording
• 480frame(NTSC), 400frame(PAL), per second for view, 120frame(NTSC), 100frame(PAL) per second for recording
• One ATA-100 Hard Disk Interface, Supports Over 200G Byte

Safety Precautions:

• The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated dangerous Voltage with in the product's enclosure that may be sufficient magnitude to constitute risk of electrical shock to persons
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintance instrctions in the literature accompanying the appliance
• Installation should be performed by qualified service Personnel only in accordance with the National Electrical Code or Applicable local codes
• Power Disconnect: Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is the ON position. The power cord is the main power diaconnect for all units
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's

Instruction on Installation of DVR:

• Check electricity at the place you want to install the DVR unit is stable and meets our electricity requirements. Unstable electricity will cause malfunction of the unit or give critical damage to the unit.
• Several chips on the main board of the DVR unit and hard disk drive inside the unit generate heat, and it must be properly discharged. Do not put any objects just beside exhaust port on the left side of the unit and do not close up an opening on the right side of the unit
• Put the DVR unit at well-ventilated place and do not put heat-generating objects on the unit. When it is installed inside 19 inch mounting rack together with other devices, please check built-in ventlation fan of the rack is properly running

Package Included:

• 1 x HDD Digital Video Recorder with CD-RW Driver Support 2pcs Hard Disk
• 1 x User Manual
• 1 x Recording Recorder
• 1 x USB Connection Cable
• 1 x Remote Controller
• 1 x DC 12V/5APower Adaptor
• 1 x Software CD