Customers Also Bought
- Model No.: S1FD-DC12
- Control Mode: Inversion (Press button ▲ -> Positive rotation; Press button ▼ -> Reversal rotation)
- Decode: Fixed code by soldering
- Power Supply (Operating Voltage): DC9V±1V (S1FD-DC9), DC12V±1V (S1FD-DC12), DC24V±1V (S1FD-DC24)
- Working Voltage Range of Relay: DC12V
- Case Size: 110mm x 65mm x 40mm
- Maximum Power: 60W
- Model No.: CA-4
- Remote Control Distance: 50m / 150ft (theoretically)
- Encode: Fixed code by soldering
- Unit Size: 88mm x 46mm x 20mm
- Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
- Wireless control, easy to install
- Control motors of Conveyors, Awnings, Winches, electrically operated Doors/Windows/blinds or other Mechanicals and Appliances.
- You can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.
- Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
- One/ several transmitters can control one/ several receivers simultaneously.
- If you use two or more receivers in same place, you can set them with different codes.
- Transmitting Frequency: 315MHz / 433MHz
- Connect the "+" of DC 12V to the "N", and the "－" to the "L". Connect DC motor to the "OUT". You can exchange output wires of the motor to change rotating direction of the motor.
- Press button ▲: Turn on Light 1, "OUT" is the output of ＋ DC 12V (1: ＋, 2: －), motor rotates in the positive direction, and it will stop after a certain time.
- Press button ▼: Turn on Light 2, "OUT" is the output of － DC 12V (1: －, 2: ＋), motor rotates in the reversal direction, and it will stop after a certain time.
- The working time of positive/ reversal rotation can be adjusted from 10 to 60 seconds. Turn R1/R2 clockwise, prolong the working time; Turn R1/R2 anti-clockwise, shorten the working time. When you press button ▲ or button ▼, the motor starts to rotate; it will stop after the working time is expired.
- When the rotation is overdone, if the restrictive switch S1 or S2 is activated, the motor will stop automatically.
- After press button ▲, you must press button ■ to stop motor firstly, and then press button ▼.
- If you pull out the Jumper of the receiver, you can press directly button ▼ after press button ▲.
- 1 x Receiver: S1FD-DC12 (Inversion Control Mode)
- 1 x Transmitter: CA-4
- 1 x User manual
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 27.75||USD$ 26.70||USD$ 25.65||USD$ 24.24||USD$ 24.24|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.