2.4GHz Wireless 2.5inch TFT Color LCD 4 Channels Receiver KY-2.4GR02

Specifications:

• Receiving Frequency: ISM2,400MHz~2,483MHz
• Intermediate Frequency: 480MHz　
• Antenna: 50ohm SMA　
• Receiving Sensitivity: -85dB　
• Power Supply: +8V
• Consumption Current: 180mA
• TV System: PAL/CCIR, NTSC/EIA
• Operating Temperature: -10°C ~ +50°C/+14°F ~ +122°F
• Storage Temperature: -30°C ~ +85°C/-22°F ~ +185°F
• Operating Humidity: 85%RH

Features:

• This Wireless 4 Channels Receiver is manufactured with international new integrated circuit and TFT colorful liquid crystal display technology. It has the following features: low power consumption, stable performance, no X-ray radiation
• It is suitable for monitor, supervision, investigation, obtaining evidence, installation, commissioning and other professional usages, and can meet high-level professional safety demands
• It is attractive for powerful function, simple operation, small volume, wireless signal transmission
• The Wireless 4 Channels Receiver can be matched with mini type colorful wireless camera for hidden usages. Its signal can penetrate wall and realize synchronization of picture and sound at the site
• The frequency range of 2.4GHz wireless audio and video receiver is 2.400GHz-2.483GHz
• It has four-channel switch (2.414GHz, 2.432GHz, 2.450GHz, 2.468GHz) improving flexibility and reliability
• The LCD 4 Channels Receiver can be used in the same channel, or one to several usage in the same channel (that is, one transmitter sends signals, several receivers receive signals, the receipt is synchronous and accurate, equivalent to wire video distributing machine) or several to several usage (that is, each transmitter takes a channel, slightly adjusting frequency of receiver to select video and audio transmission of another channel, without mutual disturbance)
• The video signals received are clear, stable and vivid in color, with good sound effect
• Video transmission in NTSC or PAL
• AV output terminal of receiver can be connected with equipment with video and audio input, for example: recorder
• The AV input terminal of receiver can be connected with equipment with video and audio output, for example, VCD, DVD, convenient for installation and commission
• Connection terminal: AV output jack, earphone output jack, power input jack, AV IN jack
• This LCD 4 Channels Receiver uses Li-ion battery, convenient for tour

Details:

• The Wireless 4 Channels Receiver is suitable for home or other places surveillance

• Made of high quality material, the LCD 4 Channels Receiver is durable and reliable for long time use

• The Wireless 4 Channels Receiver is easy to install, plug and play

• With all the accessories here, easy and convenient to use the Wireless 4 Channels Receiver

Operation Manual:

• Connect the antenna to the receiver
• Connect the receiver output to the monitor with AV wire
• Plug power jack of DC power supply into the receiver power socket (the power indicator is on)
• Plug power jack of DC power supply into the camera power socket (battery of the same voltage is acceptable)
• Tune to the desired position (until the image of wireless camera is received)
• Adjust the camera lens to the best position

Installation:

• Fix the Transmitter, using the RCA Video, the Audio signal cable connect the transmitter and the single original equipment (eg, Camera, VCD)
• Check the two machine on the suitable position, then inserting the power adapter
• The Transmitter's installation is nearly the same as the receiver's, just the receiver need to be connected with the display equipment
• Confirm that it's right to install the Transmitter and the Receiver in two places, you can open all the power switches and set the Transmitter and the Receiver as the same channel
• Observe the accepting effect, by adjusting the tact of the angle of the Transmitter and the Receiver' antenna until get the excellent Video and Audio effect, the installation is over

Attention:

• If the original launch signal is one Audio channel, both of the Transmitter's Audio input and Receiver's Audio output should choose the same Audio channel, if the original launch is no Audio, the Audio line don't be connected

Package Included:

• 1 x 2.5 Inch TFT Color LCD 4 Channels Receiver
• 1 x 5V 1A Switch Power for Receiver
• 1 x 2.4G Antenna
• 1 x Audio/Video Cable