Get DinoPoint by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Supplier item info

2.5in TFT Screen Car Rear View Monitor with 420TVL Camera RPAS EP-125

SKU: A1399000DT
Shipping cost: Free Shipping To Shipping cost:   USD$ 0.00 To United states Via Estimate shipping fee
· Orders over USD$ 50.00 will get free tracking services via air mail
Do you want to do this! What's This? Add video to your vehicle with a rearview mirror monitor and Rear-view camera. Car Rearview Mirror Monitor and Camera is an accessory that takes your vehicle to the next level. A very good rearview mirror has ultra broad-angle digital TFT Screen , digital photo frame. Easy installation and simple to use. Brand new 2.5" TFT Screen Car Rear View Monitor & AC-2550 Camera. Avoid injury to a family member or pet, and even damage to your vehicle, with this safety-first convenience product.
Let's Hit the Road!
Must-have Car Security Systems

                            
View Details>>
Best Deals
Clearance Sale
Related Items,Parts & Accessories
Product Description
Specification
Return Policies
  • Specifications:

    Monitor:

    • RCA video input
    • Speaker built-in
    • Ratio: 4:3 TFT screen
    • Resolution (H x V): 112,320 Pixels
    • Video Input Signal: 1.0Vp-p, Composite
    • Power Consumption: 4.75W
    • Power Input: DC 12V

    Camera:

    • Image Sensor: OV 7949 1/3 COLOR CMOS
    • Horizontal Resolution: 420 TVL
    • Effective Pixels: PAL: 682 x 586, NTSC: 510 x 4961
    • Min. Illumination: 0.1Lux (IR ON) 
    • Signal System: PAL/NTSC
    • Video Output: 1.0Vpp.at 75ohm
    • Power Supply: DC 12V ≤130mA(IR ON)
    • Operating Temperature: -20℃~+70℃

    Details:

    2.5in TFT Screen Car Rear View Monitor with 420TVL Camera RPAS EP-125

    • This desige of Car Rearview Monitor is stylish and delicate 

    Car Rear View Monitor 

    • Why not obtain this RPAS for your car

     TFT Screen Car Rear View Monitor

    • This is a brand new TFT Screen Car Rear View Monitor with Camera

    2.5in TFT Screen Car Rear View Monitor with 420TVL Camera RPAS

    • Connecting Cable which you need

    Precautions:

    • Recommend using a regulated DC12V power supply unit with camera for the best picture and for safe operation of the unit
    • Do not cut the power input jack and connect the conductor to power supply directly, because that will fatally injured the camera. If you have to connect the conductor, please use our cable in accessories
    • Do not attempt to disassemble the camera. There are no user serviceable part s inside. Refer servicing to qualified service person

    How to Install a Rearview Mirror Monitor in Your Car:

    • Disconnect the battery cables from the battery before beginning installation. Use a wrench or socket to remove the battery cables. Check the vehicle's repair guide for the proper wrench or socket size.
    • Remove the original rearview mirror from your car. Leave its mounting bracket on the windshield-you'll attach the rearview mirror monitor to this. Check the rearview mirror's mounting screw to see what size screwdriver you'll need
    • Insert the rearview mirror monitor into the existing mounting bracket on your windshield. Use the bolt supplied with the monitor to secure the device in the mounting bracket
    • Route an A/V power cable from the A/V selector box to the monitor. Connect the A/V cable from the monitor to the A/V power cable. Use cable ties to secure the cables and prevent them from hanging
    • Reconnect the battery. Start your vehicle and select the rearview mirror monitor on the A/V selector box. The video monitor should come on if the rearview mirror monitor is correctly installed

    How to Install a Camera in Your Car:

    • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
    • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
    • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
    • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
    • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
    • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
    • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

    Package Included:

    • 1 x Monitor
    • 1 x Camera
    • 3 x Vedio Expansion Lines

Customers' Reviews

Get DinoPoint by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!

I have bought this product
News:
Save up to 62% Off Outdoor Adventure Gear Sale
Recharge Dino Wallet, Get Extra Cash Back!!
Save up to 50% Off on New Flashlights 2013
Golden Globes 2013 Red Carpet Show Now
Popular Searches:
Android Tablets LED Flashlight Quinceaneras Dresses Evening Dresses Jackets for Women Online Shopping Portable DVD Player Men Clothing Online Hearing Aid Car Adapter Celebrity Dresses Short Wedding Dresses Bluetooth Stereo Headset LED Light Bulbs Bluetooth Headset Wii Sensor Bar Laser Pointer

Share:

Copyright DinoDirect Corporation 2013. All rights reserved. See our privacy policy, terms of use, disclaimer and takedown policy.