200W DC 24V to AC 220V USB 5V Car Power Multifunctional Inverter DY-8103

Specifications:

• The car power inverter can convert DC24V into AC 220V output
• USB Car Power Inverter can work in the state of ultrasonic sound
• Multifunctional Car Power Inverter is small, light, quiet and convenient
• The car power inverter can protect the electric circuit in a great degree
• Automatically switch off when the voltage of the car battery is low of 10V
• The output of the product is a universal socket, which can be used in many countries
• The newly-added USB output socket can be directly used to charge for MP3 and mobile phone
• Power Rating: 200VA
• Max. Power: 400VA
• Max. Efficiency: >89%
• Input Voltage: 24V
• Lower Pressure Stop: 20V+/-1V
• Over Voltage Stop: 30V+/-1V
• Protect Temperature: 50℃+/-20%
• Output Voltage: 220V+/-10%
• Output Frequency: 50Hz+/-2Hz
• Output Wave: Corrected Sine Wave

Details:

• The Power Inverter is an ultra compact and an highly portable power inverter

• Use along with insert, suitable for all kinds of cars

• Easy control with the switch button

• 200W DC 24V to AC 220V, give you a large power

How to Install a Car Power Inverter:

• Park the vehicle and open the hood. Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
• Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
• Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
• Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery

How to Install a Car Power Inverter:

• Park the vehicle and open the hood.
• Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
• Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
• Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
• Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery

Package Included:

• 1 x Car Inverter