24 LED 80mm Car Angel Eye White Light Ring Headlight 2 Pcs

Specifications:

• Flexible and durable car light strip for boat, RV, auto, truck and aircraft lighting
• Made of PVC material, it has 24 LED and give out white light
• This 24 LED light strip is easy to bend and shaper for unique design
• Low power, energy efficient, virtually no maintenance needed
• Bulb light strip with double side adhesive on the back for easy installation
• Waterproof designed strip light can be used both external and internal
• Suitable for DC 12V power supply

Details:

• It produces high lighting effect, can make your car to get a charming light.It's waterproof, flexible and durable. Special design also made car LED Light Ring very easy to install and use. It's low power consumption and also can make your car to get a charming fancy look

• It features high grade materials and workmanship.LED Car Headlights are brand new and fashionable.
  Ring Headlight suits for your auto, truck, boat, motorcycle, ATV, or golf cart

• Trendy and graceful Auto Angel Eye Ring Headlight will make your driving more joy. You will be eye-catching among crowd with this Ring Headlight. Get one for yourself or your friend. You will never regret

Install Headlights in a Car:

• The headlights can be accessed via the front part of the car through the hood. The actual back of the light should easily be spied when the hood is open. The black conglomeration of wires leading into the back of the headlight is what's holding the light into place. There are two different ways that a headlight is changed
• On newer cars, the entire molded headlight comes out from the body in one unit. According to the 2 Car Pros website, "all vehicles are different but the concept is the same." Remove the pins, screws or clips that attach the headlight to the body of the car. The screws are likely on top of the headlight. Pins and clips can be on either side. The entire headlight should easily pull forward still attached to the car--wires hanging out the back. Don't pull it too far--only far enough to get to the bulb in the back of the headlight
• On older cars, the headlight stays attached to the body
• The bulb is located in the back of the headlight where the wires are going into the light. Whether you have a newer or older car, there is some kind of twist mechanism holding the bulb into the headlight. Twist in a counterclockwise direction. Line up the tabs if there are any and then pull the bulb out. Don't touch the bulb with your fingers. The oil from your hand can cause the bulb to break when it gets hot. Limit your hold on the bulb to the black base of the bulb. The bulb can be freely handled with gloves or a cloth
• Be sure the old bulb and the new bulb are exactly the same. Do this by holding them up to each other. Compare the size of the light and the base attachments to make sure all of these parts match
• Insert the new bulb into the headlight. Line up the tabs on the wiring to the back of the headlight. Twist the bulb into place
• On newer cars, reinsert the molded headlight into place and screw it back onto the frame of the car
• Turn on your lights and check to make sure both lights are working properly. If the lights don't work, make sure the connection is strong and that the light was reinserted into the headlight properly

Replacing Headlights:



Step 1 - Purchase a Replacement Bulb:

• Purchasing a replacement bulb first will help you frame the project in your mind. In most new cars, the bulbs are sealed in the headlamp and therefore the entire headlamp will need to be replaced. In other cars, the bulb can be removed from the headlamp, replaced and re-installed in the headlamp
• Before you work on any electrical components within your car, turn the engine off, remove the key and disconnect the positive terminal from the battery

Step 2A - Replacing the Old Headlamp:

• Locate the bolts or screws that hold the headlamp in place. You will need a socket set, screwdriver or both to complete the process. It is also likely you will need to remove decorative body molding and the actual metal bracket that holds the lamp in place. The bolts may be in the front of the vehicle, under the bonnet or both. Once removed, the headlamp should pull forward to reveal the electronic connection. Unclip the connection and remove the headlamp
• Connect the electrical housing to the new headlamp, place it back in its housing and re-install the bracket and body molding. It's a good idea to turn the headlights on before you tighten the bolts to confirm the connection has been made and the new light is working properly

Step 2B - Replacing the Bulb:

• Open and secure the bonnet of your car. Behind the headlights, within the engine compartment, locate the electrical connection and determine how it is removed. It is likely that this connection twists off (by hand) and, when removed, reveals the actual bulb. This, too, should twist from its socket. Install the new bulb, replace the electrical connection and test the new light

Replacing Brake Lights:

• Open and secure the boot of your car. Behind the brake lights, within the trunk, locate the electrical connection and determine how it is removed. You may have to pull back the trunk's carpeting or covering to reveal this connection. It is likely that the connection twists off (by hand) and, when removed, reveals the actual bulb. This, too, should twist from its socket. Install the new bulb, replace the electrical connection and test the new light

Replacing Indicators:

Rear Indicators:

• Open and secure your car's trunk. Behind the indicator lights, within the trunk, locate the electrical connection and determine how it is removed. You may have to pull back the trunk's carpeting or covering to reveal this connection. It is likely that the connection twists off (by hand) and, when removed, reveals the actual bulb. This, too, should twist from its socket. Install the new bulb, replace the electrical connection and test the new light

Side Indicators:

• Side indicators will either unscrew from the exterior of the car to reveal the indicator bulb, or it is accessible from the engine compartment. Once determined, repeat the process of replacing the rear indicator and test the lights

Package Included:

• 2 x 24 LED 80mm Car Angel Eye White Light Ring Headlights