XPE WC-Q5 LED Emitter With 14mm Base

Specifications:

• Typical Driving Current: 350~700mAh
• Lumens Flux: 350mAh(107-114Lumens);700mAh(192~194Lumens)
• Voltage: 3.2~3.4V
• Dimensions: 14 x 1.5mm(Dia. x T)

Features:

• 100% brand new and high quality CREE LED emitter
• CREE XPE Cree Q5-WC LED emitter
• Ultra slim size, super high luminous efficacy
• Low electricity consumption to replace the conventional bulbs

Details:

• With super brightness and low power consumption

• This SCREE Q5-WC LED emitter has super high luminous efficacy and the brightness output is up to 194 lumens

• With the ultra slim size, this SCREE Q5-WC LED emitter is easy to take and convenient to install

Size in Detail:

CREE Q5-WC LED Emitter:

Light Effect:

• The photos below were taken in a dark room, without pre-setting the camera or editing the photos afterwards
• Different colour temperatures of the LED bulbs can be seen on the trim of the terracotta pot and on the cactus
• The first photo the object was illuminated with cool light. The cool light is the brightest
• The second photo natural white was used, it is similar to sunlight.
• The third photo the warm white can be seen, which is similar to the color of tungsten lighting and halogen lights

The Kelvin Scale:

Colour temperature has important applications in lighting. The colour temperature of a light source is usually measured in kelvins (K) at which the heated black-body radiator matches the colour of the light source is that source's colour temperature 

• Higher colour temperatures (5000 K or more) are "cool" (green-blue) color, and lower colour temperatures (2700-3000 K) "warm" (yellow-red) color

Application:

• Automotive interior /exterior lighting
• Remote / Solar powered lighting
• Decorative / Pathway lighting
• Automotive forward lighting
• Automotive signal lighting
• Household appliances
• Projector light source
• Household appliances
• Architectural lighting
• General Flashlight
• Traffic signals
• Task lighting

LED's Advantages:

• Efficiency: LEDs produce more light per watt than incandescent bulbs
• Color: LEDs can emit light of an intended color without the use of color filters that traditional lighting methods require. This is more efficient and can lower initial costs
• Size: LEDs can be very small and are easily populated onto printed circuit boards
• On/Off Time: LEDs light up very quickly. A typical red indicator LED will achieve full brightness in microseconds. LEDs used in communications devices can have even faster response times
• Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting
• Dimming: LEDs can very easily be dimmed either by Pulse-width modulation or lowering the forward current
• Cool Light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED
• Slow Failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs
• Lifetime: LEDs can have a relatively long useful life. One report estimates 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000-2,000 hours
• Shock Resistance: LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs which are fragile
• Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner
• Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

NOTE:

• Do not drive LED for more than 5 seconds without proper heat sink  

Package Included:

• 1 x LED Emitter