3 Axis Camera Hot Shoe Spirit Level Gradienter

Specifications:

• High quality 3 axis camera spirit level
• Crystal-like surface, clearly sees the level direction
• Lightweight and small size
• Convenient to carry
• A must-have useful accessory for photographers
• Camera Hot Shoe Spirit Level is guaranteed the picture maximum output size is not lost
• Size: 25 x 25 x 25mm/0.98 x 0.98 x 0.98in

Details:

• The Camera Spirit Level mounts effortlessly right into camera's hot shoe, and it can be easily placed on a flat portion of the camera, which corresponds to the lens axis

• Camera Spirit Level will help the photographer achieve a finer degree of accuracy in capturing image content

How to Read a Spirit Level:

• Place the flat edge of the level on the surface you wish to ascertain the horizontal. Ensure the glass tube with the bubble is laying parallel to the surface.
• Remove your grip from the level and watch where the bubble comes to a stop. The position of the bubble will indicate if the surface is sloping in one way or the other, or if it is level.
• If the bubble stops above the two lines, then the surface is sloping down one way and should be raised at one end. The surface should be tilted one way or the other until the bubble comes to a rest exactly between the two lines on the glass tube. At this point the surface is plumb or level.
• Indicate whether an upright is vertical in a similar way. The spirit level will have another tube placed in a circular hole on the same tool. The glass tube will run perpendicular to the previous glass tube.
• Place the edge of the level against the upright and adjust the upright until the second bubble is exactly in the centre of the two lines on that glass tube. At this point the upright will be vertical.

Package Included:

• 1 x 3 Axis Camera Spirit Level Gradienter