Customers Also Bought
- Receiving Frequency: 315MHz /433.92MHz
- Working Voltage: DC 5V ±0.3V
- Working Current: 2mA
- Demodulation Type: ASK
- Data Output PWL: TFL
- Receiving Sensitivity: -106dBm
- Working Temperature: -10℃-+60℃
- Color: Green
- Special design ensures easy installation of the receiver module
- Made through high technology
- The receiver module is of long pin design
- This kind of receiver board is designed with world famous factory high-performance superheterodyne receiver chip
- The Wireless Receiver Module is an exceptionally strong anti-interference, Wireless Receiver Module is easy and convenient to install without any further external components
- This kind of wireless receiver module can be applied to wireless remote control, bug, remote sensing, telemetry etc.The wireless Receiver Board module is designed with high quality for long time use
- Suitable for any wireless control application.This Wireless Receiver Board Module is a good choice for you!Practical and reliable, small item with great use, do not miss the wireless receiving module, you will like the way it works
- Remote control, remote measurement and remote sensing
- Anti-theft alarm signal receiving and various remote controls for home-appliances
RF Wireless Receiving Module
- The wireless receiver module RF heterodyne Receiver Module is a better capability of RF module. It insure the frequency have no excusion or distnce do not change when librated or high/low temperature. It has excellent reliability and stability, Can avoide the disadvantage of regenerative circuit which liable to be interfered and low reliability. This receiving system is a perfect choice where need high demand. The module can be used in for alarm system, guard against theft and alarm system, garage door control, Automatic doors or windows, garage gate and other pace which need remote control. It also widely used for data receiving and signal control and are speified as preferred components in remote control garage, roller curtain, door locks, alarm system, industrial control
How to Build a Wireless Remote Control:
- Open the remote control housing and place a push button switch on the side. In the upper right corner of the housing, fasten a 3-volt battery holder. Be sure enough room is available to install and remove the battery
- Run a wire from the push button switch and link to the 3-volt battery holder at the negative connection. Attach another wire to the push button switch and lead it to the Meg 1/4W resistor and the NPN silicon transistor. Run a third wire from the Meg 1/4W resistor and attach it to the 22K 1/4W resistor and and the PNP silicon transistor
- Position the infra-red LED on the front of the housing. Attach the LED and run wires to both transistors. From the 22K 1/4W resistor, run a wire to the C220.01uF 16v ceramic disk capacitor. Run another wire between the NPN silicon transistor and the ceramic disk capacitor
- From the positive connector on the 3-volt battery holder, connect a wire to the PNP silicon transistor. This will allow for proper current flow in a closed circuit. Ensure the push button switch is positioned to "off" and place a 3-volt battery into the holder. Close the remote control housing.
- Point the remote control at a receiver, making sure the LED on the control is aimed at the LED of the receiver. Push the button and the receiver should power on and off. To adjust the receiver to be programmed, point the remote control and hold down the push button switch. Adjust the pot or taper on the receiver until you hear a click. This links the remote control and the receiver
- 1 x Wireless Receiver Module
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 3.69||USD$ 3.44||USD$ 3.22||USD$ 3.02||USD$ 2.85|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.