16 Tunes Remote Control Wireless Door Bell Doorbell Button AD-318B

Specifications:

• Includes plug-in chime and bell push in elegant design and outward appearance
• Choice of 16 chime sounds
• Simple and convenient wireless installation
• Exact "same frequency and different code" technology, long remote distance, but does not interfere with neighbors' chimes
• Over 100m distance in open air
• Metal frames and walls will reduce the operating distance
• Suitable for 86-type bottom install
• 1 x A23/12V battery
• Voltage: AC110V ~240V
• Dimension: 43 x 36.5 x 38.5mm / 1.69 x 1.44 x 1.52 in
• Wireless Radio Frequency: 315MHz to 433MHz
• Color: White
• Material: PCA

Details:

• The white wireless doorbell won't effect the indoor decoration

• The back view of this wireless doorbell

• The doorbell button is clearly visible

• The remote control adds elegance to your room

How to Install the Wireless Doorbell:

• Determine the preferred location for your receiver unit. The receiver unit contains the chime and is best located someplace central in your home. Most receiver units simply mount directly on an AC outlet using the attached plug
• Install a new battery in the push button unit. You may need a flat head screwdriver to remove the cover of the unit. The screwdriver is normally inserted into a notch at either end of the unit. Use the screwdriver to gently pry the plastic cover away from the base
• Test the door push button prior to mounting the push button unit. This assures you the chime unit is functioning and allows you to gauge the volume at the selected location
• Adjust the transmitter frequency from the push button if the chime in the receiver unit does not sound. Remove the cover as described in Step 2 and locate the frequency settings
• Make additional adjustments, depending on your specific model, for volume and chime ring tone. Most models feature adjustable ring tones so you can discern which door's push button has been activated. These adjustments are made by removing the cover of the receiver unit. Adjust the chime volume and ring tone frequencies according to the labeled settings
• Mount the push button unit, or units, beside the desired doors. Some units have holes in the base for mounting screws. If so, you will need to remove the cover and use your screwdriver to drive the screws into the wall. Other units use a strong adhesive strip that allows for quick and easy mounting to vinyl or metal surfaces

Tips & Warnings:

• If over time the door chime fails to sound, or sounds intermittently, check the battery in the push button unit and make sure the receiver unit is still plugged into the wall outlet

Package Included:

• 1 x Wireless Doorbell
• 1 x Remote Control