ZhiAnBao 38 Tunes Remote Control Digital LED Wireless Door Bell Doorbell Button V004B

Specifications:

• Power Source: DC
• Supply Voltage: 12V
• Ring Tone: 38 melodies
• Consumed Power: 1W
• The Work Voltage of the Receiver: DC3V
• Batteries Model: AA R6P × 2
• Work Frequency: 315MHz or 433.92MHz
• Static electricity of the Receiver: 0.45mA(Ultra-low power ,can extend battery life)  
• Remote Control /Incept Distance: 120m(in open air)
• Work Voltage of the Emitter: 12V(Battery Model23A12V)
• Work Electricity of the Emitter: 15m
• Size: 43.5 x 34.5 x 39.5 mm / 1.71 x 1.36 x 1.56 in  
• Color: White & Blue
• Material: Plastic

Features:

• Wireless Door Bell, do not interfere with each other
• LED indicator of the Wireless Door Bell press the send button, LED indicator light will flash, emitter work
• The receiver receive the order and then send out the beautiful music reminded you
• The VIP visit, the blue-ray LED of the receiver will regular flash along with the music
• The Wireless Door Bell has 38 songs supply for choice, use the External button "up/down" to finish
• The function of volume regulate, high, middle and low three volume can choice, use the external switch to finish

Details:

• This Wireless Doorbell intercom system lets you hear a person calling at your door before you open it

• The VIP visit, the blue-ray LED of the receiver will regular flash along with the music

• Delicate streamlined appearance shows the special tastes of the host, when visitors press the remote button, the LED Door Bell will give wonderful music

How to Install the Wireless Doorbell:

• Determine the preferred location for your receiver unit. The receiver unit contains the chime and is best located someplace central in your home. Most receiver units simply mount directly on an AC outlet using the attached plug
• Install a new battery in the push button unit. You may need a flat head screwdriver to remove the cover of the unit. The screwdriver is normally inserted into a notch at either end of the unit. Use the screwdriver to gently pry the plastic cover away from the base
• Test the door push button prior to mounting the push button unit. This assures you the chime unit is functioning and allows you to gauge the volume at the selected location
• Adjust the transmitter frequency from the push button if the chime in the receiver unit does not sound. Remove the cover as described in Step 2 and locate the frequency settings
• Make additional adjustments, depending on your specific model, for volume and chime ring tone. Most models feature adjustable ring tones so you can discern which door's push button has been activated. These adjustments are made by removing the cover of the receiver unit. Adjust the chime volume and ring tone frequencies according to the labeled settings
• Mount the push button unit, or units, beside the desired doors. Some units have holes in the base for mounting screws. If so, you will need to remove the cover and use your screwdriver to drive the screws into the wall. Other units use a strong adhesive strip that allows for quick and easy mounting to vinyl or metal surfaces

Tips & Warnings:

• If over time the door chime fails to sound, or sounds intermittently, check the battery in the push button unit and make sure the receiver unit is still plugged into the wall outlet

Package Included:

• 1 x Wireless Doorbell
• 1 x Remote Control
• 1 x Battery