Universal Replacement Car Interior Dome White 48 LED Bulb Light

Specifications:

• High brightness auto interior box light with 48 long life span car LED light bulbs
• The LED's of this bright car LED light bulbs is mounted to a stiff circuit board
• The versatile auto dome light can be used anywhere such as light array for lighting trucks, trailers or door, besides using it in auto/car
• Super white and bright car LED light bulbs revitalize your vehicle's interior with maximum illumination
• Built-in current limiting resistor and protect the LED from reversed polarity + - installation
• Replacement bulb has double side adhesive in the back
• Interior bulb simply requires a trouble free plug-and-play installation
• Universal design is suitable for DC 12V power system only
• Size: 65 x 43 x 6mm/2.6 x 1.7 x 0.2in (L x W x T)

Details:

• Light up your car and your night with this LED Dome Light

• 48 long life span LEDs with 3 different plugs as the picture shows

• Long life time and low power consumption, it's suitable for many kinds of cars

Size in Detail:



Install Interior Car Lights:

• Open up the dome light cover. With older cars just twist the cover until it releases; on newer cars you need to remove several screws
• Pull out the old bulb with your fingers and compare it to the new bulb
• Press the new bulb into the socket. Use a lint-free cloth as the oils in your hands can make the bulb burn out prematurely
• Put the light cover back on
• Turn the light on to make sure it's working

Change a Dome Light Bulb:

• Turn the dome light to the "Off" position. In most vehicles, the "Off" position is the middle of the three options on the switch. Refer to your owner's manual for the exact location
• Remove the bulb lens cover. Depending on the vehicle, you may have to remove two screws holding the lens in place with a screwdriver. If no screws are present, pry the lens off with a flat head screwdriver. Place the screwdriver opposite the light switch and press in. The lens cover should pop off, giving you access to the bulb
• Unscrew the light bulb from the dome socket. Discard the old bulb. Screw a new bulb into the dome socket until the bulb is tight and secured
• Replace the lens cover then push on it to snap it in place or use the screwdriver to secure the screws

Package Included:

• 1 x Car Interior Dome White 48 LED Bulb Light
• 3 x Different Adapters Plugs