Maximum talking range 500 metres between two riders
Real two-way wireless communication by bluetooth system
Up to 140Km working speed
Up to 7 hours talking time
Safety auto-receiving cellphone calls
Advanced A2DP & EDR bluetooth profile
Stereo music/audio function(transmits from cellphone/MP3/GPS)
Wind noise DSP cancellation
Friendly for gloves
This BIM is a multifunctional device for motorcyclists,it can be used:
•1) As a handfree bluetooth headset for cellphone calls,
while riding motorcycle,operating cellphone or bluetooth headset is not convenient. but if you use the BIM it will be very convenient and safety-receive the cellphone calls even you do not need to press any button,you just need to rider your bike as normal, the proceed of receiving call will be automatic,after ring on of the call about 5 seconds, it will receive the call automatically. It also can offer rejecting call function.
•2) As a two way wireless interphone between riders and between rider & pillion, the Max talking range can reach 500m/1640ft !.
In wide open terrain two riders can communicate via interphone system at a range of 500 metres/1640ft.
Typical effective range in city is approximately 300m/950ft. please note that actual range can very widely as a result of many reasons(e.g.terrain,obstades,weather conditions etc)
it does not like a one-way walkie talkie that can not speak and listen at the same time , the BIM can offer real-time talking like a normal telephone.
It can connect with two other riders or connect with anther rider and his/her pillion.
the rider can choice which person to talk at one time.
The working speed can be up to 140Km !
3) As a wireless bluetooth music receiver and speaker,this BIM has EDR and A2DP profile , with EDR and A2DP profile it can offer another important function--- listening to stereo music from A2DP enabled cellphone,MP3 or navigation audio infomation from GPS(this MP3 or GPS should has a built in audio bluetooth transmitter)
•4) If the MP3,GPS does not have a built in audio bluetooth transimitter, you only need to have a external audio bluetooth transmitter(it has a professional name named AV Dongle,you can find it easily in the market )to pair them,then you also can enjoying this function by the BIM.
5) As a couple of speakers of MP3 or GPS. If your MP3 /GPS has not built in audio bluetooth transmitter and you have not a AV dongle, the BIM also offers another method of listening to the stereo music/audio info--- wired method.
6) As an wireless interphone/ handfree bluetooth headset/music receiver for skiers.
Safety Cellphone calls function
1) Receive a cellphone call automatically
When income a cellphone call, you will hear the ring and about 6 econds later, the BIM will receive the call automatically.
2) Receive a cellphone call by hand-operated
When hear the ring of the cellphone call, short press the Phone/Play key, the BIM will receive the call.
3) Reject a cellphone call
When income a cellphone call, you will hear the ring,immediately long press the Phone/Play key within 3 seconds, it will reject the call.
4) Hung up a cellphone call
When you finish the cellphone talk, short press the Phone/Play Key,it will hung up the call.
5) Make a cellphone call Dial a number on your phone as normal, the sound will be automatically heard in your headset
notice: some phones, like Panasonic x70, will not send the audio to the headset, you may have to press the TALK key to transmit the sound to your headset
Set up for bike- to- bike and rider-to-pillion intercom: pairing
Pairing is a one time process that is reqiured for mutual recognition between a headset and other bluetooth devices.once the two headsets are paired,they will retain paired whenever they are within range.
Please note that you can speaker via intercom to one buddy headet at a time.
•1) Pair with another rider
Long press the power/interphone key on your BIM and Long press the power/interphone key on the BIM of another rider at the same time ,until the red&blue LED of the two BIM flash alternately, short press the power/interphone key on one of BIM,when the two BIM have paired,the red
LED will extinguish and the blue LED of the will flash every 5 seconds.
•2) Pair with two other riders
You can set up your BIM as a master device and you can pair with two BIM of other riders, thus you will can talk with two riders(one bike to two bikes).
Please note : In this situation, the other two BIM will become slave devices and only you can selete that who will talk with you at a time.
STEP: Pair your BIM (BIM a)with one rider(BIM b) as 1), then turn off the BIM b. pair your BIM with another rider(BIM c). when finish the pairs, you can turn on the BIM b.
launch an interphone call(short press the Power/Interphone key),you can talk with BIM b. long press the Power/Interphone key, it will change to talk with BIM c.
•3) Pair with your pillion
If you only have paired with the BIM of one rider, you also can pair with the BIM of your pillion.
Start/finish a interphone talk
If you have turned on your BIM, short press power/interphone key,wait about 6 seconds, you will can talk with another rider or your pillion by the wireless interphone.
You only need to short press power/interphone key,it will finish the intercom talk.
·Digital Signal Processor (DSP) Technology for noise cancellation
·Excellent performance at speeds up to the legal limit with a full face helmet
·Easily mounts to all full face and open face helmets
·Up to 6 hours talk time when connected to your cell phone
·UP to 6 hours time when listening to music
typical current consumption is 55 ~75 mA
500 mAh Li Polymer battery
·Standby time: 100 hours
·Charging time:~ 3 hours
·Chip brand: CSR
·All weather, rain and snow resistance
·Removable headset unit from the helmet
1 * set of 500m Multifunctional "rider to rider" "rider to pillion" bluetooth interphone/handfree bluetooth headset/ bluetooth stereo music receiver for motorcyclists outdoors and skiers