Keywords: eBook Reader | Car Adapter | Celebrity Dresses | Android Tablet
Specifications:
VIII. Function Description
1) Open Microsoft PowerPoint and PowerPoint files.
2) Press "Play Slides" button to play slides from the current page. Or press and hold for 2 seconds to play slides from the first page. Press "Play Slides" the second time to execute "ESC" function to escape the full screen mode.
3) Press "Page Down" button and "Page Up" button to go forward and backward.
4) Press "Laser Pointer" button to turn on the laser,press the second time to turn off the laser.
5) If hyper links exist on the page, "Tab" button can be used to jump among them and "Enter" button can be used to open the hyper link.
6) After the hyper link is opened, you can press and hold "Tab" button to switch between all opened application windows. Release "Tab" button to turn to the window you want to switch to.
IX. Installing the wireless presenter
1) Take out the USB receiver to turn on the wireless presenter,Take out the USB receiver from the wireless presenter to turn on it. You can press any button to check whether the power is on or not. If the LED is flashing when the button is pressed, it means the wireless presenter is turned on.
2) Install the USB receiver,Please plug the receiver into the laptop's USB port.The system will automatically detect the device.Follow the steps to search the driver of the USB device and complete the setup.
3) Operate the wireless presenter,When a button is pressed, the green LED on the wireless presenter will flash. When the USB receiver receives control signal, the LED on the USB receiver will flash too.
4) Turn off the wireless presenter ,Plug the USB receiver into the wireless presenter,the wireless presenter will be automatically turned off.
X. Charging the wireless presenter
1) Low power indication ,When the power is low, the red LED on the wireless presenter will flash slowly to remind the user to recharge the wireless presenter. At this time, all the buttons are locked and the wireless presenter cannot be operated.
2) Recharging the wireless presenter ,Connect the wireless presenter to a USB port of laptop via USB cable, the red LED will stop flashing and keep red to show the wireless presenter is being recharged. If the red LED turns off, it means the recharge is completed.
Normally the recharging time is about one hour.
XI. Establishing connection ,The product has been pre-set and paired between the wireless presenter and the receiver. It is not necessary to synchronize the device. However, this paired ID may be lost due to RF interference and cause the wireless presenter not to be connected properly.Here is the method for setting the presenter's ID.
1) Step 1: Connect the USB receiver to a laptop, Plug the USB receiver into USB port on the laptop.If it is the first time to plug the USB receiver into the laptop, the computer will atomically set up the driver.This will take about 2 seconds, and then the LED turns off.
2) Step 2: Operate the PC keyboard ,Here is the procedure to sequentially press the following three keys: Caps Lock, Scroll Lock, and Num Lock.
a. Turn off Caps Lock, Scroll Lock and Num Lock.
b. Turn on Caps Lock, Scroll Lock, and Num Lock.
c. Turn off Caps Lock, Scroll Lock.
d. Turn on Caps Lock, Scroll Lock.
These keys must be pressed in the above order.
The LED statuses of the three keys are as follows,(Black means the LED is off and grey means the LED is on). If the procedure is operated correctly,the LED of the receiver will be on to indicate the receiver is in ID-matching status.If the USB receiver's LED is not on, you can retry from step 2 to try again.
3) Step 3: Push match button on the wireless presenter,Press and hold "Black Screen" button for 3 seconds. The LED of the USB receiver will turn off if the matching process is successful. Then you can press any button to check whether the wireless presenter can function properly.
Frequently Asked Questions
1) How to know the battery is out of power? If the red LED on the wireless presenter starts to flash slowly, it means the power is low and the wireless presenter needs to be recharged. At this time, all the buttons are locked and the wireless presenter cannot be operated.
2) How to know the charging is completed?When the wireless presenter is being charged, the red LED on it keeps on. If the red LED turns off, it means the recharge is completed.
3) The laser pointer does not work, why?Firstly you need to check whether the USB receiver is taken out. Only when the USB receiver is out, the wireless presenter is turned on.Secondly you can check whether the wireless presenter is in low power or out of power. If the LED on it is flashing slowly, it means the power is low and it needs to be recharged.If all the other buttons can work, only the laser pointer cannot work, the laser diode may need replacement.
4) When the USB receiver is plugged into the laptop's USB, the laptop does not detect the device, why?Please try another USB port or another PC.
5) The wireless presenter can work, but other buttons cannot work, why?The product has been pre-set and paired between the wireless presenter and the receiver. However,this paired ID may be lost due to RF interference.Under this situation, the wireless presenter can work,but other buttons cannot work.You can use "Establishing connection" part mentioned above to reset the connection between them.
6) Can I exchange the USB receiver with other wireless presenter?Every wireless presenter has an exclusive code for the wireless presenter and USB receiver. If you exchange the USB receiver with other wireless presenters, they cannot work together! You can use the method mentioned above to set up the code between them.
Charter 3 About Safety
XII. Safety measures
1) To avoid possible eye damage, never point the wireless presenter at people especially their faces,or look directly into the wireless presenter's laser beam.
2) Avoid pointing the wireless presenter's laser beam at a mirror or other highly reflective surface.
3) Keep the wireless presenter away from children.
4) Never view the wireless presenter's laser beam using telescopic devices, such as a microscope or binoculars.
5) Any attempt to disassemble, adjust or repair the wireless presenter may result in exposure to laser light or other safety hazards.
XIII. Certifications
CE, FCC, RoHS
Package Included:
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Dino Video
Other Video
