7in TFT LCD Car Rear View Monitor & Color CCD 420TVL AC-600 Camera 778S

Monitor Specifications:

• Dot Pitch: 0.107 x 0.370  
• Contrast: 400:1
• Brightness: 400cd/m2
• Response Time(ms): 10/30 (Tr/Tf) ms
• Viewing Angle: 65/65/65/50 (L/R/U/D)
• Video Input: 1VP-P 75Ω
• Power Supply: DC 12V ±10%
• Power Consumption: About 7W
• Lamp Life Time: 20,000 hours
• Car rearview mirror with TFT LCD monitor
• 7" color TFT
• 480 x 234 pixel
• Wireless remote control
• Car riversing backsight surveillance
• Automatically shift back-view system when reversing the car
• Blue screen when no video signal
• Brand new & factory sealed

Camera Specifications:

• Image Sensor: Color CCD CMOS
• TV System: PA/NTSC
• Horizontal Resolution: 420 TVL
• Effective Pixels: PAL: 512 x 582, NTSC: 512 x 492, OV7949: 628 x 586 (PAL), PC 1030 PAL/NTSC: 640 x 480
• Sensing Area: 1/3: 4.9mm x 3.7mm, 1/4: 3.6mm x 2.7mm, OV7949: 5.961 x 4.276mm, PC 1030 PAL/NTSC: 3.5964 x 2.7084
• Min Illumination: 1.0 Lux/F1.2 (0 Lux whth IR on), 0.5 Lux (0 Lux with IR on)
• Diagonal Viewing Angle: 120℃, 170℃ (optional)
• Night Vision: 0, 3-5m, 5-10m, 10-15m (optional)
• Video Output: RCA connector 1.0Vp-p.75ohm
• Current Consumption: 50~60mA, max 300mA with IR on
• Power Supply: DC 12V
• Operating Temperature: -20℃~60℃, RH95% max
• Storage Temperature: -40℃~80℃, RH95% max

Details:

• The car rear view monitor set is perfect for backing into tight spots or moving in reverse when visibility is limited like an extra eye

• Well packed 7" TFT LCD car rear view monitor set with 420TVL Camera, durable and reliable for long time use 

• Car Rearview Mirror Monitor set is an accessory that takes your vehicle

• With cable which you need, easy to connect the rear view car camera

• Comes with a remote control, it is very convenient to use the car rear view monitor set

• With all accessories here, the car rear view camera is ready to use, plug and play

Operation:

• Connect the power cable of the  monitor and the one for the camera with the power cable in the vehicle. When the camera is intended only for reversing
• Connect the power cable of the camera (and the power cable of the monitor) with that of the reversing gear. The red(or black/white)wire is positive, the black is negative

Cautions:

• Just use the accessory AC adaptor and auto-mobile adaptor (12V)
• For your safe, please plug off the AC adaptor or automobile adaptor when you don't use the TV
• Please don't turn the volume too high in order to keep convenience and safe
• Please turn down the volume when using the open-typed headphone
• Please stop to use headphone or turn down when appear Tinnitus
• The ear experts suggest you'd better avoid to use headphone continues too long

 Precautions:

• Recommend using a regulated DC12V power supply unit with camera for the best picture and for safe operation of the unit
• Do not cut the power input jack and connect the conductor to power supply directly, because that will fatally injured the camera. If you have to connect the conductor, please use our cable in accessories
• Do not attempt to disassemble the camera. There are no user serviceable part s inside. Refer servicing to qualified service person

How to Install a Rearview Mirror Monitor in Your Car:

• Disconnect the battery cables from the battery before beginning installation. Use a wrench or socket to remove the battery cables. Check the vehicle's repair guide for the proper wrench or socket size.
• Remove the original rearview mirror from your car. Leave its mounting bracket on the windshield-you'll attach the rearview mirror monitor to this. Check the rearview mirror's mounting screw to see what size screwdriver you'll need
• Insert the rearview mirror monitor into the existing mounting bracket on your windshield. Use the bolt supplied with the monitor to secure the device in the mounting bracket
• Route an A/V power cable from the A/V selector box to the monitor. Connect the A/V cable from the monitor to the A/V power cable. Use cable ties to secure the cables and prevent them from hanging
• Reconnect the battery. Start your vehicle and select the rearview mirror monitor on the A/V selector box. The video monitor should come on if the rearview mirror monitor is correctly installed

How to Install a Rear-View Camera in Your Car:

Rear-view cameras are especially useful in tight parking lots, dark areas or in places where children might be running around. You can install as many of these cameras as you want, though one or two is usually enough

• Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
• Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
• Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
• Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
• Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
• Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
• Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Tips & Warnings:

• Don't rely solely on the rear-view camera when backing up. Use it as a supplementary aid
• You must have the rear-view monitor set up and installed correctly to receive the video signal from the rear-view camera
• Don't install the camera (or any electrical device) with the battery connected, or you'll risk a severe electric shock

Package Included:

• 1 x Monitor
• 1 x Camera
• 1 x Charger
• 1 x Car Cable
• 1 x Remote Control
• 1 x Bracket
• 1 x Base
• 1 x Video Cable
• 1 x AV Cable
• 1 x Connect Cable
• 1 x Pad