Customers Also Bought
- This kind of receiver module has a wide receiver bandwidth, usually ± 10MHz, factory general emphasis on the 315MHz
- The receiver module generally uses DC5V power supply, if special requirements for adjustable voltage, voltage adjustment range of 3 ~ 8V
- Receiver frequency is usually 315MHz, any special requirements for adjustable frequency, the frequency adjustment range of 100MHz ~ 500MHz
- Receiver quiescent operating current of the factory typically 5mA, any special requirements can reduce the current, minimum current adjustable from 1.5mA, but the receiver sensitivity will be reduced
- Working Voltage: DC 5V
- Static Current: 5mA
- Receiving Sensitivity: -103dBm
- Transmission Frequency: 315MHz (260-440MHz more than 20 kinds can optional)
- Coding Type: Fixed Code
- Color: Green
- Size: 49 x 20 x 7 mm/1.9 x 0.8 x 0.3 in(L x W x H)
- The wireless receiver module is of fine workmanship
- Of high quality for long time use
- A close look at the wireless receiver module
- Designed with long pins
- Receiver board generally haS seven external interface, the above in English, said. "VDD / VCC" said the next power positive, "GND / VSS" said the next power negative, "D0/13", "D1/12", "D2/11", "D3/10" said the four signal output, " VT "acknowledged receipt of instructions, 6 outputs of the receiver board are" D4 / 8 "," D5 / 7 "2 outputs, but the address code less 2
- Before use to connect 50 Ohm 1 / 4 wavelength of the antenna and the antenna should be straight in order to achieve the best possible reception, wavelength = speed of light / frequency; would also like to check the vibration resistance and vibration resistance of the remote control match, so that in order to work properly. Receiver power supply requirements of the higher ripple voltage is too low or interference will cause the receiver distances close, so to maintain voltage stability and excellent filtering measures; receiver board on the environment have requested, would receive the same frequency interference distances close, if the external microcontroller, the crystal oscillation frequency doubling up on the receiver board interference, the higher the frequency crystal oscillator, the resulting interference with the greater use should be far away from interference sources, or try to select a frequency higher than low crystal
- The receiver board mounted inside the metal shell will be shielded and reduced receiver distance, should be outside of the antenna probe the metal shell, so that the distance will greatly improve reception. Should try to avoid two receiver plates together at the same time, the two oscillating source will interfere with each other to receive the distance becomes close
- 1 x Wireless Receiver Module
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 4.00||USD$ 3.87||USD$ 3.74||USD$ 3.57|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.