Bullet Style 1/4 Inch SHARP 420TVL Color CCD Camera DF-302ZP

Specifications:

• TV System: 1/4 inch SHARP Color CCD
• Image Sensor: NTSC/PAL
• Horizontal Resolution: 420TV Lines
• Scanning System: NTSC: 525 Lines, 60Field/Sec, PAL: 625 Lines, 50 Field/Sec
• S/N Ratio: 48dB(AGC Off)
• Minimum Illumination: 1.0Lux(F:2.0)
• Gain Control: Automatic
• White Balance: Automatic (2500K to 9500K)
• Electronic Shutter Time: Auto, NTSC:1/60~1/100,000Sec, PAL: 1/50~1/100,000 Sec
• Characteristic: 0.45
• Sync System: Internal Synchronization
• Video Output: 1 Vp-p 75ohm
• Operation Temperature: -10 ℃~ +50℃ RH 95% Max
• Storage Temperature: -20℃ ~ +60℃ RH 95% Max
• Power Supply: DC 12V ±10% 400mA
• Employs digital signal professor (DSP) chipset for image control
• Built-in image enhancer for ultra-clear images/pictures
• Built-in auto electronic shutter (AES), auto gain control (AGC), auto white balance (AEB) functions
• Reverse polarity protection
• All weatherproof anodized aluminum housing and sun shields
• Rain-and fog-resistant glass coating
• 48-inch DIY cable (Power jack, RCA or BNC connectors) available as an option

Details:

• Install the wall bracket on the wall

• Fix the camera on the bracket

• When picture shown up on the monitor, adjust the camera to make the camera to the suitable position and lock the bracket by screw

What are the recommended camera placements to capture the most relevant shots:

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:

• 1 x 1/4 inch Sharp Color CCD Camera