Hi-resolution 420TVL 1/3" Sharp CCD Micro Box Color CCD Camera

Specifications:

• Signal Format: PAL/NTSC
• Image Sensor: 1/3" Sharp CCD
• Effective Pixels: 510(H) x 492(V)-NTSC 500(H) x 582(V)-PAL
• Scanning System: NTSC: 525Lines, 60 Field/Sec, PAL: 625 Lines, 50Field/Sec
• Sync System: Internal synchronization
• Resolution: 420 TVL
• S/N Ratio: More than 46dB(AGC Off)
• Gamma Characteristic: 0.45
• Illumination Sensitivity: 1.0 Lux@F:2.0(D:0.5lux, N:0.05lux)
• Gain Control: Auto
• B.L.C.: Auto
• White Balance: Auto
• Electronic Shutter Speed: NTSC: 1/60-1/100,000Sec, PAL: 1/50-1/100,000 Second, Auto
• Video Output: 1Vp-p 75OMS, Negative
• Power Supply: DC12V ± 10%
• Current Consumption: 100mA ± 10%
• Operating Temperature: -10℃ ~ +50℃
• Storage Temperature: -20℃ ~ +60℃

Details:

• 1/3inch Sharp CCD Micro Box Color CCD Camera

• Easy to setup and simple to operate

How to Clean a CCD Camera:

• Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
• Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
• Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
• Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

• 1 x CAMERAY CM-4200C Micro Box Color CCD Camera
• 1 x Camera Holder
• 1 x C/CS Mount
• 1 x User Manual