1/3inch SHARP CCD Color Vidicon Camera 420TVL DV-4200

Specifications:

• Metering Method: Peak-verage djustable method
• Input Voltage and Current: DC 8V-16V & 35mA or less
• Input Signal: Video signal (VS or V)
• Iris Accuracy: +/- 15% at video signal level
• Sensitivity Adjustment: Video signal level 0.5 to 1.0Vp-p, continuously adjustable
• Input Impedance: High impedance
• Iris Response Time: Approximately 1.5 seconds in overall range
• Application Temperature Range: 14 F to 122 F
• Device: 1/3 sharp CCD
• TV System: PAL/NTSC
• Picture Elements: 752(h) X 582(V)
• Scanning Frequency: Horizontal 15.625khz
• Horizontal Resolution: 420TV
• Minimum Illumination: 1.0Lux F1.2
• Video Output: 1.0VP-P ; VBS7.5 BNC
• AGC: ON/OFF
• SN RATIO: More than 48DB
• BLC: ON/OFF
• Shutter: EE/AI
• Auto Iris Control: VIDEO/DC

Details:

• This is 1/3inch SHARP CCD Color Vidicon Camera

• This is the charge of camera

How to Clean a CCD Camera:

• Plug the camera in. If the batteries were to die while you're cleaning, the camera will automatically close on your cleaning tools and will need expensive repairs
• Read your camera's manual to find out how to lock the mirror and hold open the shutter. It may be a custom function on your camera, and your manual will describe how to do this. Each camera is slightly different
• Use an air blower to blow air onto the mirror to clean off larger particles of dust. Do not stick the air blower inside the camera. If the camera closes, or the mirror moves, it will scratch it. A foot-powered air pump works well
• Use a sensor brush to clean the camera's sensor. Only use a sensor brush if this is not the first time the camera has been cleaned. Move the brush gently from left to right, take it out and spray it off with the air brush, then stroke the sensor again. Repeat this until the sensor appears clean

Package Included:

• 1 x Camera
• 1 x 3.5-8mm Auto Iris Lens
• 1 x Adjustable Camera Bracket
• 1 x 12V AC Power Support