Car 150W DC 12V to AC 220V Power Inverter Adapter

Specifications:

• Heavy duty but small, quiet and convenient, car vehicle 150W DC 12V to AC 220V power inverter charger adapter
• Auto alarm warns of low battery level prior to auto shut down
• The output of the product is a universal socket, which can be used in many countries
• Car USB power inverter with USB port that can connect to portable computer, mobile telephone, camera, mini-hifi, daylight lamp etc
• Use along with insert, suitable for all kinds of cars
• Car power inverter can change the DC 12V into AC 220V output
• 150W car inverter charger can be widely used in all kinds of electrical apparatus, which voltage rating are AC 220V and frequency are equal to 50Hz, such as mobile telephone, portable computer, electric light, digital camera, TV and so on
• Multifunction power inverter adapter can be made from advanced PWM CMOS chip
• Charger adapter can work in the state of ultrasonic sound, which can both in a great extent minish the bulk and weight and make the circuit work without noise
• DC adapter can protect the electric circuit in a great degree
• Can automatically switch off when the voltage of the car battery is low of 10V, so that your car can normally start
• The newly-added USB output socket can be directly used to charge for MP3 and mobile phone
• Built-in a fan for cooling
• Input Voltage: DC 12V
• Output Voltage: 220V
• Power Rating: 150W
• Frequency: 50Hz

Details:

• The USB car power inverter adapter is an ultra compact and an highly portable

• Heavy duty but small, quiet and convenient, the USB car power inverter adapter provides great performance

• The switch of the USB car power inverter adapter

• The USB car power inverter adapter can change the DC 12V into AC 220V output

• 150W USB car power inverter adapter can be widely used in all kinds of electrical apparatus

How to Install a Car Power Inverter:

• Park the vehicle and open the hood. Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
• Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
• Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
• Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery

Package Included:

• 1 x Car Power Inverter