5A DC24V to DC12V Car Power Inverter Negative Booster In 18V-32V

Specifications:

• This DC24V to DC12V power inverter can change the DC18V-32V into DC 12V output
• DC12V power inverter can be widely used in all kinds of electrical apparatus, which voltage rating are DC 12V
• Best choice for car users with this 18V-32V power inverter
• Car power inverter is made from advanced PWM CMOS chip
• It is small, light, quiet and convenient
• It can protect the electric circuit in a great degree
• Input Voltage: 18V-32V
• Output Voltage: 12V ± 5%
• Output Current: 5A
• Max. Efficiency: >90%
• Ripple Voltage: <120mV
• Overvoltage Stop: 14V ± 0.5V
• Protect Temperature: 50°C ± 20%
• Size: 88 x 74 x 48mm / 3.5 x 2.9 x 1.9in(L x W x H)
• Cable Length: 130mm / 5.1in

Detail:

• Best choice for car users with this 18V-32V car power inverter negative booster

• This Car Negative Booster can change the DC18V-32V into DC 12V output

• DC 24V to DC 12V and there is a power indicator

• The Car Power Inverter Negative Booster can protect the electric circuit in a great degree

• Metal body makes it is small, light, quiet and convenient

How to Install a Car Power Inverter Negative Booster:

• Park the vehicle and open the hood. Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
• Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
• Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
• Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery

Package Included:

• 1 x Car Power Inverter