-
-
Specifications:
Camera:- Image Sensor: OV 7949 1/3" color CMOS
- TV System: PAL / NTSC
- Total Pixels: PAL: 628 x 586 NTSC: 510 x 496
- Resolution: 420 TV lines
- Minimum Illumination: 0.1Lux(1RON)
- Video Output: 1.0Vp-p into 75Ohm
- Power Supply: DC12V ≤ 130mA(IR ON)
- Operating Temperature: -20°C°~ +70°C
Monitor:
- Type: Digital TFT LCD
- Display Size: 3.5Inch
- Display Format: 4:3
- Power: ≤3W
- Power Supply: DC12V
- Video: 2 Video input can switch to reversing
- System: PAL/NTSC auto switch
- Contrast: 350:1
- Pixel: 480x234
- Installation: Install on the dashboard
Details:


- 3.5in LCD Car Rearview Mirror Monitor With Camera RPAS.Car Rear View Cameras are made of high quality material, the Rear View Camera for Cars are durable and reliable for long time use, also the high quality material makes the car wired camera waterproof, got well protection

- This remote control is very convenient and compact.Most important, this Car Rear View Camera can efficaciously help you learn about the traffic along the road and driving securely.Perfect to set up your car security surveillance

- Simple and easy to install.As a result, the lens provides an image that's extremely close to how your eye perceives a subject, making it excellent for portraits and images that require a natural depth of field. In addition, the lens focuses as close as you can, helping you take extreme close-ups. Finally, the lens offers an excellent color balance


- This desige of Car Reariew is very easy to install .Car Rear View Camera is an accessory that takes your vehicle to the next leve

- This desige of Car Reariew Monitor is stylish and the size is very quite .Car Rear View Camera is especially useful in tight parking lots
Precautions:
- Recommend using a regulated DC12V power supply unit with camera for the best picture and for safe operation of the unit
- Do not cut the power input jack and connect the conductor to power supply directly, because that will fatally injured the camera. If you have to connect the conductor, please use our cable in accessories
- Do not attempt to disassemble the camera. There are no user serviceable part s inside. Refer servicing to qualified service person
How to Install a Rearview Mirror Monitor in Your Car:
- Disconnect the battery cables from the battery before beginning installation. Use a wrench or socket to remove the battery cables. Check the vehicle's repair guide for the proper wrench or socket size
- Remove the original rearview mirror from your car. Leave its mounting bracket on the windshield-you'll attach the rearview mirror monitor to this. Check the rearview mirror's mounting screw to see what size screwdriver you'll need
- Insert the rearview mirror monitor into the existing mounting bracket on your windshield. Use the bolt supplied with the monitor to secure the device in the mounting bracket
- Route an A/V power cable from the A/V selector box to the monitor. Connect the A/V cable from the monitor to the A/V power cable. Use cable ties to secure the cables and prevent them from hanging
- Reconnect the battery. Start your vehicle and select the rearview mirror monitor on the A/V selector box. The video monitor should come on if the rearview mirror monitor is correctly installed
How to Install a Rear-View Camera in Your Car:
- Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts.
- Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
- Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
- Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
- Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
- Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
- Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you
Package Included:
- 1 x Car Rear View Monitor
- 1 x AV Cable
- 1 x Connecting Cable
- 1 x Camera
- 1 x Manual
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Kate
from ()
Bought this item on
01-18-2011- Other Thoughts: I liked it when I got it new. But it rained a couple weeks after being installed, an got full of water. It says it is "water resistance". Since it goes on the rear licence plate, it has to keep rain out. But moisture got in it and now I can't see anything in the monitor.
Was this review helpful?
Jill
from ()
Bought this item on
01-08-2011- Other Thoughts: During the day time it's a decent cam, at night, not so good. I give it three out of five because I believe it could have a little better picture at night.
Was this review helpful?
Zach
from ()
Bought this item on
03-29-2011- Other Thoughts: I have been using this camera. The image is very nice. I would recommend this to anyone looking for a nice cheap backup camera.
Was this review helpful?
Jack
from ()
Bought this item on
12-31-2010- Other Thoughts: The product received was great, it exceeded my expectations! <br/>The entire ordering and delivery process went very smoothly!
Was this review helpful?
Peter
from ()
Bought this item on
03-01-2011- Other Thoughts: Ok this camera has a perfect resolution and is very easy to install. <br/>the camera was installed with no issues. you can see at night with no problems.
Was this review helpful?
Maybe you are interested in:
-
by MideaUSD$ 84.99
-
USD$ 53.99
-
USD$ 9.99












![AES [The AES brand promotion] G1 Set bifocal lens double angel eyes HID xenon lamp conversion genuine](http://p.lefux.com/61/20130509/T0001AKEEB/the-aes-brand-promotion-g1-set-bifocal-lens-double-angel-eye-8538320-small.jpg)











![Free Shipping genuine parts] Kia K5 imported LED daytime running lights the assembly send light box / installation line /](http://p.lefux.com/61/20130524/T0001ASGYM/free-shipping-genuine-parts-kia-k5-imported-led-daytime-runn-1-small.jpg)





























