Specifications:

• Dimensions: 75 x 33 x 19mm/2.9 x 1.3 x 0.7 (in)
• Cord Length: 720 (mm)
• Input: 2 x AA battery
• Output: DC 5.0V 0.8A
• Color: Black/White
• Compatible Unit: iPhone, iPod Touch, iPod video, iPod nano, iPod photo, iPod mini (not suitable for shuffle), iPhone 3G 3GS

Features:

• This is a USB Travel Charger, which is great traveling partner for your iPod
• Just connect your player by dock cable of this iPhone USB Charger to get extra battery
• Serve as back up battery and charger by 2 AA battery (not included)
• iPod Travel Charger with retractable cable, portable and no hassle
• Use this iPod Travel Charger to charge your player at home, on the road, or whenever your player is not connected to a computer or wall socket
• Cable is around 67cm long

Details:

• This iPhone USB Charger can charge for the iPhone when you are traveling or on the place of no AC power

• With original appearance, it is very convenient to use. This iPod Travel Charger is your right choice when you are out

• Just plug in your iPod / iPhone as you move around hotel rooms. Get an extra one for travel use

• In a rush to charge your iPod / iPhone with this super iPod Travel Charger! No need to turn on your computer, just plug your iPod / iPhone into the wall power outlet and enjoy your fully charged iPod / iPhone anywhere you go

How to Fix an Electrical Plug?

A plug with a cracked or broken housing, a missing insulating cover or loose, badly bent prongs may present a fire or shock hazard or both; unplug it immediately and replace it. You might also want to swap a standard plug for one of a different color or a flatter one that takes up less room behind furniture.

• Installing a terminal-screw plug
• Assuming that you don't mind losing a little cord length, cut the old plug off with wire cutters rather than trying to disassemble it
• Open the new plug according to the instructions. Some snap on and off the cord, and others screw together
• Insert about 6 inches (15 cm) of the cord through the plug's housing
• For a lamp or flat heater cord, split apart the two wires if they're not already split. Start the cut with a utility knife and then tear 2 inches (5 cm) apart by hand
• For a round cord, such as those used for some appliances and machinery, strip off the outer insulation. Make a 1-inch (2.5-cm) cut lengthwise at the cord's end; grasp the insulation to tear open about 3 inches (7.5 cm), scoring the surface with a utility knife as needed; and cut off the outer insulation at the top of the tear, being careful not to nick the wire insulation
• Unless the plug body is equipped with a clamp or another strainrelief connector, tie the two wires together using an Underwriters knot
• Determine how much wire must be exposed to reach and wrap around the terminal screws, then cut off any excess with wire cutters/strippers
• Remove 1/2 inch (12 mm) of the wire insulation with wire cutters/ strippers, using the stripper hole that corresponds to the gauge of wire you are stripping
• Twist the wire strands together and bend them to form a loop, then wrap each loop clockwise under the appropriate terminal screw
• For an ungrounded (two-prong) plug, attach the white or ribbed wire under the silver terminal screw or to the terminal on the wider prong, and attach the black wire (hot) under the brass terminal screw or to the terminal on the narrower prong
• When an appliance or tool requires a three-prong grounded plug, connect the grounding wire (green) under the green terminal screw on the grounding prong; attach the black wire (hot) under the brass terminal screw and the white wire (neutral) under the silver terminal screw
• Tighten any cord clamp or other strain-relief connector

Package Included:

• 1 x iPod iPhone / iPhone 3G 3GS Emergency Charger