HI, What is the procedure to program many remotes control with many receivers to avoid interferences between them? Is it possible to buy two receivers (315mhz) and four remotes (on different orders) and to programme them to remotes for one receiver? What kind of encoding type (for receiver and remote) must I buy to be able to upgrade my installation if I want to add remotes and receivers in the futur? Thank you
We found a similar user mannual for you. Could you please have a look at it.
This series can copy from the remote control by the following steps:
buttons distribution: clear code and unlock 2S hold locked after LED lights, flash 3 started keeping locked down keys, loosen unlock the keys, 5 seconds, according to three times to unlock key indicator flashes three times, quick shan, which indicates that the code has been cleared. 3 copies of his left hand, right hand our original remote from the remote control, two guy near. Press the button, the two control locks, LED twinkle light after 3S 3, then quickly, it shows that the original flashing control of the key lock code has been our since kao remote learn.
The other three buttons are the same operation. 4 recover accidentally cleared when you from the remote control, guy, you can press the start button, and mute, LED twinkle light after 3S, then began to 3 points, which indicates that the flashing rapidly since the code was restored kao remote control. : 1) adjusting frequency, and wear a hat frequency range is 270-390MHZ hat off. The frequency range is 390-450MHZ 2), use ceramic no-sense screw batch can adjust the frequency of you want.
Hope it can help you. We are expecting the cooperation with you.