Specifications:

• Operating Voltage: DC 12V
• Static Current: ≤150Ma
• Alarm Current: ≤600mA
• Wireless Receiving Frequency: 315MHz±0.5MHz
• Wireless Receiving Sensitivity: 315MHz±0.5MHz
• Anti-interference: 1V/m(frequency:20-1000 MHz)
• GSM Frequency: 900/1800/1900MHZ
• Outer Alarm Siren Volume: 110dB
• Working Condition: Temperature: -10°C~+40°C
• Humidity: ≤90%
• Capacity for Wireless Device: 16pcs
• Wire Device: 3pcs
• Size: 22.0 x 15.0 x 4.0mm / 8.7 x 5.9 x 1.6in (L x W x H)

Features:

• It is white
• This GSM SMS Home Alarm Security System makes use of the nowadays universally existed GSM network to achieve SMS alarm to defend your home / office / villa / shop and so on
• This GSM home alarm system can support GSM/CDMA, and English and Chinese SMS to control system and motion detecting and arm/ disarm
• This GSM Home Alarm System can capture thief 's photo and send to owner's cell phone or email box
• This GSM Home Alarm System can support the function of motion detecting with alarm
• This Wireless Burglar Alarm System can pre-set 5 groups of alarm Phone Numbers with room No., can call the owner, town police and monitoring center
• This wireless burglar alarm system can make sure the safety of your home with password operation and control the alarm system by remote controllers and SMS to make it arm, disarm, listen-in and photo-taking
• This GSM home alarm system can control the switch of light, air-condition and heater or cooker with the three output ports by mobile phone or telephone
• Control panel of this GSM home alarm system has three input ports, which can be connected with three wired detectors

Details:

• The product works with auto-dial intruder alarm system to extend the communication mode to GSM phone

• Coding, GSM alarm security can be flexible to encode the detectors

• This wireless burglar alarm system can capture thief 's photo and send to owner's cell phone or email box, which provides evidence for case

• When any unwelcome people or thieves breaks into its defense area, the siren of this GSM home alarm system will cry loud to scare the intruder away

• When the magnet is moved more than 1/2 inch from the sensor, the alarm will be activated if the home security wireless system is armed

• By these two controllers, you can control the GSM alarm system

• The detail size of this wireless Home Alarm Security System

How to Install the Wireless PIR Motion Detector:

Passive Infrared (PIR) Motion Detectors protect space by 'looking' for changes in infrared (heat) energy levels caused by movement of an intruder. The passive infrared detectors are passive devices. i.e., they do not transmit any form of energy. When a person enters and moves within the detecting zone, his body which is at its normal temperature of 98.6 degree F., radiates more (or less) thermal energy than the surroundings and such minute difference in thermal energy is detected by the PIR. In simple words, PIR keeps a picture of the heat levels in its view and keeps on comparing the new view with the stored one. In case there is any change then they activate the alarm

Installation Diagram:

Suggestion:

• Short circuit "5S" for testing and "5MIN" for normal use; Fix the sensor onto the bracket
• Adjust the sensor to a proper angle and then slide the power switch on the side to "ON", and it will enter into the normal working state after 30 seconds
• Upon the working light flashes frequently in green, please replace the batteries

How to Install Wireless Door Sensor:



Your home security wireless door sensors are important detection points - 75% of all break-ins occur through a door. Use common sense when installing home security wireless sensors - remember that the objective is to make sure that the sensor and magnet are located within 3/8" of each other. (See Figure 1) Be sure the home security wireless sensor and magnet are not obstructing the opening of the door

• Hold the home security wireless sensor near the top of the door, close to the opening edge of the door (not the hinge side). This is the mounting location for the sensor. Hold the magnet on the doorframe next to the sensor. The alignment marks must match up. (See Figure 2) The sensor and magnet must be within 3/8 of an inch from each other in order to operate properly. This is the mounting location for the magnet
• Now that you have determined the proper location you can attach the home security wireless sensor and magnet. Thoroughly clean the mounting location with a clean, dry cloth. Remove the protective backing off the 3M strip on the sensor. Make sure the home security wireless sensor is straight and is close to the edge of the door. Attach the sensor to the door. Press firmly and hold in place for 30 seconds
• Now remove the protective backing off the 3M strip on the magnet. Make sure the alignment marks are facing each other. Attach the magnet on the doorframe next to the sensor. Press firmly and hold in place for 30 seconds. When the magnet is moved more than 1/2 inch from the sensor, the alarm will be activated if the home security wireless system is armed

About Wireless Home Security Alarm Systems:

Home security systems are steadily moving towards a more wireless solution. With news stories about children abducted from home, and increases in burglaries and home invasions, security is very important for households. Families have an innate desire to protect themselves and their belongings from intruders. Home security systems are being installed to act as the eyes and ears of families while they are away from home or asleep at night. Not only a valid defense against theft, wireless home security systems fight against fires and aids in other medical related emergencies

• Benefits: One of the greatest benefits to using a wireless home security system is the easy and quick installation. For most wireless systems, you only need to connect the device to an existing phone line, and it is ready to go. Another benefit is the cost; wireless systems costs are considerably cheaper than the other types of home security systems. This is largely due to the reduced need for the installer to deal with structural issues in your dwelling

• Features: The most well-known features of wireless home security systems are burglary, fire and medical monitoring and alarms. Other types of alarms that are associated with the device are emergency, gas and flood warnings. Other features includes integral keypad, hand-held transmitters, several different arming modes, choice of alarm types, programmable power supply, event logs and fixed frequency receiver types

• Other Uses: Wireless home security systems are not just attractive because of their easy installation practices. Homeowners like them because of their other uses as well. One use is the ability to contact the fire department if a fire breaks out while no one is at home. For other systems, to have this feature included will cost more than it does with wireless systems. With some of the wired systems out there, the fire alarm option can cost up to $1000 for installation and $20 a month in monitoring. For wireless systems, there is no or little installation cost, and monitoring isn't required. Wireless alarm systems can also be connected to lights and appliances in the home. Would-be burglars can be deterred when lights and appliances are turned on and off at random times. This gives the appearance that someone is home even when no one is

• Wireless Sensors: For the wireless alarm system to work, several wireless sensors are placed around the home. Burglary sensors are attached to doors and windows. When a door or window is opened while the alarm is engaged, the wireless sensor sends a signal to the main device. The device then blasts a siren and/or contacts the police, depending on the programming settings. In case of a fire, the sensor picks up on smoke in the environment, much like a smoke detector. A signal is sent to the system, and the fire department is notified through the connected phone line if the alarm isn't disengaged within a set time frame

How to Buy a Home Alarm System:



Each year more than 2 million American homes are burglarized, according to the National Burglar and Fire Alarm Association (alarm.org). Most of them have no alarm system. Electronic security devices provide affordable peace of mind, and recognizes and reacts instantly to unauthorized entry

• Survey your home and determine how many windows and doors you want integrated into the system
• Contact your insurance agent, a security system adviser, the NBFAA or your police department's crime prevention department for names of security system companies. Ask each company for an inspection, a recommendation and a quote in writing
• Decide whether you want to contract with a 24-hour central monitoring station for a monthly fee. If your system detects a break-in, it alerts security professionals to dispatch local police. Less expensive dialer accessories can link sensors to your phone lines and call preselected numbers if security is breached
• Consider your family's lifestyle. Do people or pets sometimes roam the house at night? Select appropriate sensors and locations
• Choose a system with a control panel that can monitor all the zones in your home. Each window or door integrated into the system is considered a zone. A basic system (about $400 without monitoring) can control eight zones, but many can be expanded to watch up to 32
• Determine locations for the control panel and keypads. The control panel commands the system and the keypads allow you to program the system and turn it or its components on and off. A typical setup puts one keypad near the front door and another keypad--and perhaps a panic button--close to the bedrooms
• Look for systems that connect to lighting controls, smoke and carbon monoxide sensors, and flood detectors. Also make sure system switches won't freeze in cold climates. (See How to Buy a Home Automation System.)
• Choose a user-friendly code that everyone in the family can remember in an emergency. Try the keypad to assure that it's easy to use
• Realize that it's difficult to retrofit a hardwired security system. With a wired system, you'll have to drill holes in walls so wires can be routed. If you want to avoid this expense and inconvenience, choose a wireless system

Package Included:

• 1 x Main Panel
• 1 x Wireless PIR Sensor
• 1 x Wireless Door Sensor
• 1 x Siren
• 2 x Remote Controllers
• 1 x Charger
• 1 x User Manual