Compatible LCD FM Transmitter and Car Charger for iPod

Specifications:

• High quality iPod Car FM Transmitter
• LCD display with blue background lighting
• High fidelity, stereo, digital PLL
• Car FM Transmitter transmits the best quality sound from your player to your car FM radio do not need any battery
• The LCD FM Transmitter is powered by the iPod
• With the car charger, you can enjoy the music, get your iPod and this transmitter charged at the same time
• As for how to adjust the frequency, you can just press the button "+" or "-" provided on this transmitter
• This is a non-OEM product
• Frequency Range: 88.1 - 107.9 MHz, 0.1Mhz/step

Details:

• It transmits the best quality sound from your player to your car FM radio do not need any battery

• Just plug the FM Transmitter into the headphone jack of your MP3 or any audio sourve including your PDA, CD Player, Cassette player or connect it to your PC or laptop computer

• You can just press the button "+" or "-" provided on this transmitter

• LCD FM Transmitter transmits the best quality sound from your player to your car FM radio do not need any battery

Installation of FM Modulator:

• Remove the face plate on your stereo unit, use screwdriver to remove cradle screws and pull the stereo out to reveal the wiring harness
• Check for your ground and hot wires. Look at your owner's manual for the wire diagram if you are unsure of which wire does what
• Take ground wire on FM modulator and secure with electrical tape to antenna wire housing. This is the metal connector on the outside of the wire, you will not need to use wire cutters to splice into the wire. Just attach by wrapping the wire of the modulator once around the housing and then taping with at least two wraps
• Splice into the hot wire (normally the red wire). Use the wire cutter to snip through the hot wire of the car and not the modulator
• Remove plastic coating to reveal 1/2 inch of wire on each side of hot wire and splice in FM Modulator red wire by twisting into other two wires
• Wrap with electrical tape
• Set the modulator to desired frequency. There will be a switch to change from 87.9, 88.1, and 88.5
• Replace the wire harness and modulator back into the inside of car dash, then replace holding mount screws and radio faceplate
• Turn your car on, tune radio to set frequency and enjoy your iPod or MP3 player

Strengthen Your FM Radio Reception:

• If you don't have an antenna connected to your FM receiver, purchase a simple dipole antenna--a simple T-shape flexible wire-- and connect it to the FM antenna inputs on the receiver. Because FM signals are directional, you'll want to experiment with the positioning of the wire to find the best reception of the station you're trying to receive
• If you're still not getting a good signal, try an indoor amplified antenna, which you'll find at an electronics store. Don't buy one unless you get a guarantee that you can return it for full credit if it doesn't solve your reception problems
• If your signal is weak because you live a long way from the transmitter, install an outside antenna and mount it as high as is practical. If you're primarily interested in getting signals from one station or from a group of stations in one direction, get a directional antenna and point it toward the transmitters
• If you're using a portable FM radio where the only antenna is the power cord, stretch the cord as straight as possible and experiment with positioning again
• Temporarily switch to monaural mode to improve a weak signal on an FM receiver

Easy to Operate:

• Connect the transmitter to your iPod
• Pick up any channel from your car radio
• Adjust the transmitter to the same frequency
• All's done. You can just enjoy the music and news with complete satisfaction

Package Included:

• 1 x Car Charger
• 1 x Car FM Transmitter for iPod
• 1 x User Manual