Specifications:

• The camcorder AV Output Cable has the length of 1.5m
• It is easy for you to install and identify the JVC Cable in a few minutes
• The colorful cable pole can attract your eyes
• The cable includes 4 pole male jack to one yellow (video), one white (left audio), one red (right audio) and male RCA
• You can show yourself freely on your TV screen with the cable
• This TV Out cable is good quality and high quality
• You can use this TV Out cable for long time
• This is a best accessory for your home
• This is NON-OEM product
• Length: 1500mm/60in

Details:

• The plug of this TV Out cable was tiny which was just large a coin

• The cable which owns long length and very flexuous

• The AV Output Cable has four diffrent colorful poles, and is easy to install

• The cable can connect DV with TV to show some vedios to your TV screen, and is safe to use

• The TV Out cable is durable and safe for you to use

How to Record TV Programs to a JVC Camcorder 

 JVC camcorders can be used to record TV programs when connected to an audio/video source, which can be a cable or satellite box or the television itself, using the appropriate a/v jacks on the back of the console. Most JVC camcorders feature a Digital Video Interface (DVI) jack, and high-definition models are equipped with a High Definition Media Interface (HDMI) port, making the camcorder compatible with HDTV. Both connections will provide high-quality audio and video signal transmission for recording to the camera's hard drive or digital video, depending on the model

• Check the port on the back or rear side of the JVC camcorder to determine the best cable connection for recording programs. A six-sided HDMI plug will transfer true high-definition video on camcorders equipped with this high-def feature. Otherwise, a DVI cable can be used
• Connect the cable by inserting the plug straight into the jack on the camera. HDMI and DVI plugs insert only one way, so don't attempt to force the plug
• Connect the other end of the cable to the HDMI or DVI jack on the back of the television or the cable or satellite receiver box if recording directly from a receiver
• Set the television or the receiver to the desired channel for recording
• Insert a tape into the camcorder or check the hard-drive memory status to be sure there is enough storage capacity on the camcorder. JVC camcorders with a built-in hard drive hold 60 to 120 gigabytes of digital information, depending on the camera model. A 60 GB camera can hold approximately 12 hours of digital video and audio
• Set the camcorder to external recording on the control panel
• Press the "Record" button on the camcorder to begin recording the program
• Change the camcorder switch to "Playback" to review the recorded program when the HDMI or DVI cable is connected to a TV 

Tips & Warnings



Turn off the camera while plugging and unplugging the a/v cable into the jack.

 Paclage Included:

• 1 x JVC DV TV-Out Cable